S 1.6l 0-60 In 6.7 Sec. Panoramic Roof Automatic Trans Red White Black Int. on 2040-cars

Auto blog

Thanks to smaller engines, vehicle dependability falls for first time in 16 years

As automakers have made engines smaller and smaller to improve fuel economy, problems in those vehicles have gotten bigger and bigger. That's the synopsis of a J.D. Power vehicle-dependability study, which found that dependability dropped for the first time in 16 years, largely because the proliferation of four-cylinder engines is causing the vehicles to be less reliable. Specifically, the number of problems per 100 vehicles (or what J.D. Power calls PP100) during the past 12 months for 2011 model-year vehicles rose six percent from the year-earlier figures for 2010 model-year cars. Singling out four-cylinder vehicles revealed about a 10-percent increase in problems during the past year. This issues largely related to engine hesitation, rough transmission shifting and lack of power, signaling the inability of vehicle makers to iron out some of the problems in their smaller engines as they strove for better fuel economy. Six- and five-cylinder engines proved far more reliable. Among car brands, BMW's Mini sub-brand came out as least reliable, with 185 problems per 100 vehicles during the past year. Toyota's Lexus badge was easily the most reliable, with just 68 problems per 100 vehicles. Coming in second place was Mercedes-Benz. The overall average was 133. Check out J.D. Power's press release below. J.D. Power Reports: Increased Engine and Transmission Problems Contribute to Decline in Vehicle Dependability for The First Time in More Than 15 Years General Motors Company Receives Eight Segment Awards, While Toyota Motor Corporation Garners Seven and Honda Motor Company Earns Six WESTLAKE VILLAGE, Calif.: o Owners of 3-year-old vehicles (2011 model year) report more problems than did owners of 3-year-old vehicles last year, according to the J.D. Power 2014 U.S. Vehicle Dependability StudySM (VDS) released today. The study, now in its 25th year, examines problems experienced during the past 12 months by original owners of 2011 model-year vehicles. Overall dependability is determined by the number of problems experienced per 100 vehicles (PP100), with a lower score reflecting higher quality. The study finds that overall vehicle dependability averages 133 PP100, a 6 percent increase in problems from 126 PP100 in 2013. This marks the first time since the 1998 study that the average number of problems has increased. "Until this year, we have seen a continual improvement in vehicle dependability," said David Sargent, vice president of global automotive at J.D.

Mini Superleggera patent renderings suggest production prospects

Mini impressed us all when it revealed the Superleggera Vision concept at the Paris Motor Show a couple of months ago. But even before the little roadster concept debuted, there were already rumors of its production potential. And those rumors are only being further entrenched by the emergence of a series of patent renderings. Bearing much more than a passing resemblance to the concept, these images show what could be a revised, production version of the Superleggera, though not without its concessions to reality. For one thing, it looks like it's got a proper framed windshield, but it's hard to tell with the roof in place – something we never saw on the concept, either. It's also got more substantial wing mirrors, but the fin on the rear deck is still there, as are the extractor vents on the hood. We also note that the grille openings are the same shape as the concept's. Of course, the emergence of these images and their filing with the relevant authorities doesn't necessarily mean that Mini is moving ahead with the roadster's production. But if it did, it would likely ditch the concept's electric powertrain, and could stand to fill the void left by the discontinuation of the maligned, outgoing Mini Roadster that was essentially a scrunched Cabriolet with a cowling where the rear seats and stacked roof would be. Parent company BMW is likely taking into account that its rival Daimler didn't have much luck when it slotted a unique roadster of its own into the Smart lineup, so here's hoping that if it does give the Superleggera the green light, it'll have more success in the marketplace.

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.