2013 Mini Cooper Cooper 2dr Hatchback on 2040-cars

Auto blog

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

Mini John Cooper Works wears a racing suit for the Nurburgring

Mini is returning to the Nurburgring 24 Hours, one of the most grueling races in the world, after a decade-long hiatus. The BMW-owned British firm is supporting a private team called Bulldog Racing that's entering a heavily-modified John Cooper Works Hardtop into the event. The track-bound hatchback doesn't look, sound, or feel like a standard John Cooper Works Hardtop. Several modifications were made to prepare it for the race, including fitting the turbocharged, 2.0-liter four-cylinder engine normally found in the Clubman and the Countryman. It develops 306 horsepower and 330 pound-feet of torque, and it spins the front wheels via an eight-speed automatic transmission with an integrated differential lock. For context, the standard John Cooper Works Hardtop is rated at 228 horsepower and 236 pound-feet of torque. The engine slurps fuel from a bigger, 26-gallon tank and it exhales through a modified exhaust system. Dialing in more power wouldn't be much use without suspension and braking modifications to keep it in check. To that end, the Hardtop gains an adjustable suspension system, reinforced Uniball bearings for all moving chassis and suspension parts, and more powerful brakes from BMW M Performance. Bulldog Racing also installed a full body kit that looks like the one worn by the John Cooper Works GP, which is limited to 3,000 units. It includes a front splitter, flares over the wheel arches, an adjustable rear wing, and a rear diffuser. There's more than initially meets the eye: we're told that the underbody is completely covered as well. Makrolon windows replace the production car's glass units to reduce weight. Inside, you won't find many components that still carry a Mini parts number. Open the driver's door, which now features a carbon fiber panel, and hop over the full roll cage to settle into an OPM racing seat that faces a KMP quick-release steering wheel. The digital instrument cluster and, somewhat surprisingly, the infotainment system's screen remain, but the rear seats and most of the trim pieces have been removed. Bulldog Racing will continue to fine-tune the track-bound Hardtop in the coming weeks. Some tests will be performed on the Nurburgring, while others will take place on the private test track that BMW operates near Miramas, a town in the south of France. The hot hatch is scheduled to make its competition debut at the 50th edition of the Nurburgring 24 Hours taking place in Germany from May 26 to 29.

Mini Paceman modified by Roberto Cavalli for annual Life Ball charity

This year's award for Life Ball Mini designer goes to Roberto Cavalli. The Life Ball is a charity event held in Vienna, Austria every year that raises money to fight the spread of HIV and AIDS. Since 2001, the year of its reintroduction, Mini has been involved with the ball, auctioning a car that has been made over by a world-famous designer. This year Cavalli gets the nod and a Paceman for a canvas.
The iridescent brown/black paint is the eye-catcher in the sketch above (click to enlarge), but don't forget to note Cavalli's logo on the roof. We're not sure what other flourishes he has in mind for the car, but those in attendance will find out on May 24 when it's unveiled at the Cavalli store opening in Vienna. The press release below has more details.