2012 Mini Cooper S Jcw John Cooper Works Aero Pkg Pano Manual Cln Carfax Wow Jcw on 2040-cars

Auto blog

Mini to introduce all-wheel-drive Clubman

The latest Mini Clubman shows how the diminutive brand will go in a larger, more utilitarian direction in the future. The next step might make the wagon an even more versatile option for buyers. A rumor from MotoringFile that cites "sources familiar with the plans" claims that the vehicle will get the automaker's next-gen All4 all-wheel-drive system as soon as spring 2016. Allegedly the all-wheel-drive system derives from the setup that's available on the BMW 2 Series Active Tourer, which shares the Mini's UKL platform. The layout uses a multiple-disk clutch at the rear axle to manage power to the back wheels and can route up to 100 percent of the grunt to the tail in a pinch. When extra traction isn't needed there, power goes exclusively to the front. The All4 system will allegedly be available on both the Clubman Cooper and Cooper S models, and MotoringFile estimates the cost of ticking the option box at around $1,500. After introducing the tech on the standard versions, a hotter John Cooper Works model capable of powering all of its wheels will also reportedly begin production around next November. Mini will reportedly also offer this all-wheel-drive tech in the next-generation Countryman. The vehicle will use the UKL platform like the rest of the brand's lineup, but the crossover will grow even larger to look more off-road ready, according to rumors. We reached out to Mini USA spokesperson Mariella Kapsaskis, who says "she can't confirm anything officially about an all-wheel drive Clubman or JCW variant." Related Video:

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

The Mini John Cooper Works Rally is set for Dakar

In recent years, there have been convincing Minis tailored for rallying: Dakar wins were accumulated with gusto. Now there is a new version for 2017, named the Mini John Cooper Works Rally. Its debut will be the 2017 Dakar Rally running through Bolivia, Paraguay, and Argentina. The new rally car has been built with experience gathered from rallying the earlier Mini All4 Racing, and it's based on the Countryman. Key areas reworked were the aerodynamics and the weight distribution to enable a lower center of gravity. As X-raid (Mini's motorsports partner) CEO Sven Quandt puts it: "The center of gravity has gone down substantially – we placed about 50 kilos [110 pounds] downwards by some 50 centimeters [19.7 inches] in the center of the car, which helps the handling and makes the car much more comfortable over all types of terrain, and aids the handling on a rally track with lots of corners." There is a new chassis frame, and the powertrain benefits from an updated engine mapping and thermal management. The interior has also been redone. Speaking of the powertrain, the Cooper Works Rally runs a 3.0-liter straight six from BMW's turbodiesel portfolio. In this guise, the TwinPower unit produces 340 horsepower at 3,250 rpm and a very respectable 590 lb ft of torque from 1,850 rpm. The retained ALL4 four-wheel-drive system has a six-speed SADEV sequential gearbox, together with lockable, oil-cooled Xtrac diffs with a central SADEV unit. The 2017 Dakar Rally runs from January 2-14. Related Video: