2007 Mini Cooper Type S Automatic,clean Title on 2040-cars

Auto blog

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

'Why isn't he stopping?' Mini driver describes being pushed sideways by dump truck

Yesterday, a video out of Toronto made the rounds on social media. It was scary to watch, as a dump truck pushed a Mini sideways a half-kilometer (third of a mile). But there were no details about why this accident happened or who was involved. Today, we know more:   This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Courtenay Erhardt, 26, is a nurse who was driving her Mini to a coronavirus vaccination site to administer shots to homeless people. She says she was waiting at a stoplight before heading up an onramp. “I was in front of him at that stoplight. We were both trying to get onto the Gardiner (Expressway)," she told the Toronto Star, which has a photo of Erhardt and a close-up look at the Mini stuck to the Kenworth's bumper. "He hit me from behind when we were merging." "[The dump truck] just sort of bumped my back rear-end and unfortunately I went sideways and the truck just continued to go up the ramp," Erhardt told CTV News Toronto. "I just remember holding my horn and my steering wheel and just screaming. Just like bawling and screaming. I honestly didn't know if my Mini was going to flip, or veer out into oncoming traffic on the Gardiner," she said. "I just remember thinking, 'Why isn't he stopping? Why is he still going?'" A couple in another car behind the truck saw smoke coming off the truck and knew something was wrong, Erhardt said. They pulled up alongside her, saw what was going on, then pulled ahead of the truck and forced it to stop. They called 911 and helped Erhardt escape her car. The truck driver, Erhardt said, emerged. “He said, ‘I didnÂ’t see youÂ’ and asked me not to call the cops. He asked if he could pay for the damages. He was young.” He has been charged with several offenses, Toronto police said.  Police Sgt. Murray Campbell released a statement to CTV saying, "Operators of large vehicles do not have the benefit of such lower/smaller vehicles, in their ability to see out of windows in all directions," implying the truck driver couldn't see the small car beneath his hood. Campbell advised motorists to make sure they can see truck drivers so the truck drivers can see them.  Which is good advice. That said, this truck driver surely felt that something was wrong — and heard the sounds that we can hear in the video. Erhardt, though terrified, was not injured. She credits the couple who helped her, along with the Mini Cooper.

First Mini John Cooper Works prototype spied

The highlight of Mini's 2014 Detroit Auto Show stand was the arrival of the John Cooper Works Concept, a sportier version of the three-door hatch that presages the next JCW model on the new platform. Now, we have our first images of the production car undergoing winter testing way up north in Sweden.
Really, the Mini camouflage can't hide what this car is. Between the JCW-branded brake calipers and extra intakes in the front fascia, it's fairly easy to see that this is the sportier version of the car our own Jeremy Korzeniewski wrote about last week. We're expecting the JCW variant to pack a fair bit more firepower than the three-cylinder Cooper he tested, of course. Rumors have circulated that the hottest Mini model could jump to 230 horsepower, up from the current, non-GP car's 208.
There are a number of style features missing here, and while it's entirely possible we'll see things like the JCW Concept's diffuser and side gills arrive when this car is shown in production form (or even further along in testing), their absence in these spy photos is telling. We certainly think this car will become the production JCW Hardtop, but there may be another explanation. The lack of certain aesthetic features means this could be a test of the JCW Engine Kit, which in past Minis slotted in between the standard Mini Cooper S and the factory Works car. We'll admit, it's a long-shot, but there is precedent for it - the JCW Tuning Kit arrived a year before the factory model in the last-generation car. The same reasoning could be used to explain the presence of the JCW-branded brakes, which have been another well-known Mini accessory over the years.