2007 Mini Cooper S With 6-speed Manual And Turbocharged Engine!! Original Owner on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini Countryman spied looking less and less Mini

As the entire Mini lineup continues to grow in size, our latest spy shots for the upcoming Mini Countryman testing in Germany reveals the automaker's biggest car will stick to the trend of increasing semantic contradiction. This latest prototype drops some of its camouflage over the previously spied model that was spotted testing in the winter. Unlike the last test mule we saw, the disguised vehicle ditches the hexagonal grille for one that mimics the current model's design with a more traditional layout. The prototype also loses the sporty, multi-spoke wheels for a more boring, plastic-like set. The side and back end of the vehicle are heavily camouflaged, hiding the rear design of the prototype. But Mini's iconic taillights are still evident with the most current prototype only having one exhaust outlet, while the previously spotted model sported two. As expected, the next-gen Countryman should grow longer and wider. The increase in size will coincide with a switch to BMW's UKL2 platform. We also expect the Countryman to share the same three- and four-cylinder turbocharged engine options as vehicles on the same platform, namely the Mini Clubman and BMW X1. This prototype, with its low-end wheels and single exhaust outlet has us thinking that Mini is testing out one of its more fuel-efficient models. After the Countryman's debut, which is expected to happen at the Paris Motor Show in October, a performance-oriented John Cooper Works model and a plug-in hybrid variant should follow suit. Related Video: Featured Gallery 2017 Mini Countryman Spy Shots View 9 Photos Image Credit: CarPix Spy Photos MINI Crossover Hatchback SUV

Mini Countryman X-Raid gets some off-road chops courtesy of the Dakar team

Mini trades on its heritage quite a bit, particularly when it comes to racing. But one aspect of its motorsports history has been difficult to capitalize on: Dakar off-road racing. That's understandable, considering the disparity between Mini's road-going cars and the Mini-branded trucks built by X-Raid that do the racing. X-Raid itself seems to have figured out how to bridge that gap with its own set of upgrades for the Mini Countryman. X-Raid's example for its off-road upgrades is a Mini Cooper S Countryman All4, though we would expect the various parts could just as easily be fitted to other Countryman variants such as the base 134-horsepower Cooper Countryman. The S makes more sense for a racing company what with its 189-horepower turbocharged four-cylinder and the All4 offers off-road friendly all-wheel drive. Though Mini doesn't go into specifics about the suspension and chassis upgrades, we know that there is some level of suspension lift, as well as 28-inch all-terrain tires mounted on what appear to be 17-inch beadlock wheels. These modifications give the Mini Cooper S Countryman Powered by X-Raid (yes, that's the actual full name of the car) an extra 1.6 inch of ground clearance. As with the parts list, Mini and X-Raid haven't given precise pricing or availability for the parts. X-Raid is a German company, and we suspect it's only planning on selling the parts in Europe, but we wouldn't be surprised if there were a way to have them ship to the U.S. If you're interested in getting your own, Mini says to contact X-Raid directly for more details, and you can find their contact info at their official site, linked here. Related Video: