2007 Mini Cooper S Hatchback 2-door 1.6l on 2040-cars

Auto blog

Mini deletes center rail in Countryman, Paceman

When Mini first introduced the Countryman, it only came as a four-seater, with a center rail between the two seats that could house things like cup holders and could be slid back and forth. Buyers could even opt for a full-length center rail that ran from just aft of the gear shifter all the way back between the rear seats, like we did in our long-term 2011 Cooper S Countryman All4, shown above.
Shortly after the Countryman's launch, Mini was able to offer the vehicle with a proper rear bench seat; the company could not offer this at launch due to NHTSA guidelines that governed the minimum vehicle width for three-person seating, but those rules were changed. And now, we've received official confirmation of something we reported last year: the Countryman is losing its center rail and four-person seating arrangement altogether. Moving forward, buyers will only be able to spec a Countryman with the bench seat, and a cup holder will be affixed to the back of the forward cabin's center console.
The larger-but-smaller Paceman will also be losing the center rail between its rear seats, but the car will remain a four-seater, instead having a console between the two rear seats that houses a cup holder, an iPod cozy and a 12-volt outlet, according to USA Today.

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini considering sports car replacement for Coupe and Roadster?

The next-generation Mini lineup could see some big changes, according to a report from Australian site CarSales. Starting with the debut of the third-generation Mini Hardtop at this year's Los Angeles Auto Show, we could see a regular string of Minis on the stages of the world. But the bodystyles we see might not be what we've grown used to.
A four-door sedan could eventually arrive, while the polarizing Mini Coupe and Roadster are likely to be replaced by a dedicated sports car with unique sheetmetal and uprated engines. While the rest of the line is switching to three-cylinder, turbocharged engines, the new sports car, which will be available in both soft- and hardtop variants, will use some version of BMW's 2.0-liter, turbocharged four-cylinder. The Aussie site also claims that the interior treatment could take inspiration from the Mini Vision concept car, while showing off the know-how BMW gained when working carbon fiber into the i3. The new model(s) would likely arrive in late 2015 or early 2016.
According to CarSales, we'll see the three-door Hardtop at the 2013 LA Show, along with a five-door hatch that is different from the Clubman at the 2014 Paris show. The Clubman, meanwhile, will arrive in Geneva in 2015, while the Convertible is slated for later that same year. The current Countryman and Paceman are expected to be around for some time, before being joined by an MPV. Eventually, the larger Minis will share their architecture with the BMW X1.