2007 Mini Cooper Hatchback 2-door on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

BMW and Mini getting GoPro integration

The small, high-quality and relatively inexpensive GoPro camera has been revolutionary for Internet video, especially of cars. Imagine how much awesomeness and hilarity we would have missed without them. Finding ways to integrate the cams into performance cars is becoming increasingly popular among automakers, as well. For example, the 2015 Chevrolet Corvette has its Performance Data Recorder, and Volkswagen is giving GoPros to early buyers of the 2015 GTI. BMW Group is going straight to the source for its rendition, though, with a new app that allows drivers to control a GoPro from inside of some BMW and Mini vehicles.
In July, owners with 2012 or later models equipped with BMW Apps or Mini Connected can download the new app. There are a few hurdles to jump over, though. Not only do users need a model with the infotainment system, a WiFi-equipped GoPro camera is also required. The app also must be installed on an iPhone connected to the vehicle.
Once all of those stipulations are met, the app can configure and control the GoPro through iDrive and display a nearly live image on the infotainment system. Menus are simplified on-screen but still allow users to select among six camera modes, aim it and start and stop recording. While filming, it shows recording time, battery life and signal strength. While BMW's approach isn't quite as nicely integrated as the Corvette's solution, it's interesting to see automakers working to make filming easier. Scroll down to read the full announcement.

BMW 2 Series gets 3-cylinder Mini engine

BMW just keeps lopping off cylinders from its engines and sliding the ever-more-diminutive mills into its models. This spring, Europeans will get some of the automaker's smallest yet thanks to a new entry-level 2 Series that will share a powerplant with the Mini Cooper. The Bavarian company will also introduce a few other tweaks to the compact coupe across the pond. The 218i is the new 2 Series base model, and it shares its 1.5-liter turbocharged three-cylinder with the latest family of Minis. The engine makes the same 134 horsepower and 162 pound-feet of torque, but BMW does have some tiny changes for it. First, the orientation is swapped to fit lengthwise under the hood and drive the rear wheels. Just as importantly, buyers can order it with an eight-speed automatic, rather than the six-speed in the Minis. BMW claims that the little engine gives the 218i a 50:50 weight distribution, and it takes around 8.8 seconds to reach 62 miles per hour with the standard six-speed manual – tack on another tenth for the automatic. Either way, top speed is still a perfectly respectable 132 mph. Those acceleration numbers, incidentally, are over a second slower than what the latest Cooper is quoted at. Beyond this new base model, BMW will bring a few other additions to the 2 Series for Europe. The 220d oil burner will be available with xDrive all-wheel drive, and the company will introduce several new equipment bundles called Advantage, Luxury Line, Sport Line and M Sport. Each will bundle various options and trims together to appeal to buyers. No word yet on whether the 218i will eventually make it to North America, but we aren't holding our breath. Scroll down to read BMW's lengthy release about all of the changes set for the 2 Series. The BMW 2 Series Coupe: New entry-level engines, new model variants, even greater individuality. Premiere of the BMW 218i Coupe with 3-cylinder petrol engine from the new BMW Group engine portfolio and the BMW 220d xDrive Coupe – new and varied range of equipment features for model variants Advantage, Sport Line, Luxury Line and M Sport. Munich. From March 2015, new entry-level engines, a further four-wheel drive model and additional equipment options will increase the diversity of features available for the BMW 2 Series Coupe. With the market launch of the new BMW 218i Coupe, a three-cylinder petrol engine from the BMW Group's latest engine family will be featured for the first time in the brand's sporty and elegant compact model.