2006 Mini Cooper Base Hatchback 2-door 1.6l on 2040-cars

Auto blog

500-hp Acura V6 turns this classic 1974 Mini into a mid-engined sleeper

Originally designed on a napkin, the world-famous Mini launched by the British Motor Corporation (BMC) in 1959 was envisioned as a cheap, practical city car for families on a budget. Now, 61 years later, it's a sought-after classic that many aftermarket companies hail as the ideal foundation on which to build their wildest dreams. Gildred Racing thought further out of the box than most by turning a Mini into a mid-engined, 500-horsepower sleeper. Starting with a 1974 model, the California-based firm removed the original four-cylinder engine (and the four-speed manual transmission bolted right under it, where you'd normally expect to find the oil sump) and completely stripped the interior. Only the front seats ended up going back in; the space occupied by the tiny rear bench is now home to a 3.2-liter V6 that started life under the hood of an Acura CL Type S from the early 2000s. It's mounted transversely, and it spins the rear wheels via a six-speed manual transmission. Acura quoted the six's output at 260 horsepower, which would be a healthy upgrade for the little Brit, but Gildred tuned it to 500 horses and 383 pound-feet of torque by making a long list of modifications (including, significantly, adding a supercharger). That's a 466-horse increase compared to a stock 1974 Mini 850, so the scope of chassis upgrades is long. It includes bigger brakes made by Wilwood, and a fully redesigned suspension. And, although packaging a V6 in a small, front-wheel drive car like the Mini was as challenging as it sounds, Gildred pulled it off admirably. The engine bay is now home to the fuel tank and the radiator, while opening the trunk reveals a huge exhaust. The trade-off, of course, is that there's no longer a trunk, but it's a sacrifice we'd happily make. Performance specifications haven't been released yet. Gildred simply said its 1,400-pound Super Cooper is "quite impressive," which we believe. The original wasn't; it took 34 seconds to reach 62 mph from a stop. Gildred also made several changes in the name of modernity. It added a 9.7-inch iPad where you'd expect to find a touchscreen for the infotainment system in a modern car, an Alpine sound system, a push-button ignition, power locks and windows, LED headlights, plus automatic A/C. We imagine the whole cabin gets hot when the V6 works up a sweat. The passengers sit on leather- and suede-upholstered Recaro bucket seats that are heated and cooled.

Xcar takes the Mini Challenge, and it sounds awesome

The third-generation Mini is well and truly on sale in markets across the world. The new four-door model should be arriving soon, if it isn't already on sale in your neck of the woods, and the latest John Cooper Works model made its official debut just a few weeks ago at the 2015 Detroit Auto Show. We aren't going to be talking about any of those right now, though. That's because our chums at Xcar took it upon themselves to sample the third-generation Mini Challenge racecar, a 275-horsepower, hardcore, fully committed competition version of the otherwise adorable Mini Cooper S. At roughly 30,000 British pounds (about $45,200 at today's rates) there's a lot to like about the Challenge car. Aside from a gutted cabin and aggressive aerodynamic kit, the racer has been fitted with slick tires, a Quaife sequential gearbox, adjustable dampers, Alcon brakes and a consequently lower curb weight – under 2,600 pounds with an average-sized driver. It's fair to say the Challenge driving experience figures to be unlike your typical road-going Mini. And considering that, we think the folks that built the car, Total Track, have fulfilled their promise of delivering a "touring car experience at a fraction of the cost." Have a look at the Xcar video and let us know what you think. Be sure to crank up your speakers, because the Challenge sounds excellent.

Mini reveals it's developing an electric John Cooper Works model

We at Autoblog are extremely fond of the Mini Cooper SE electric car. So we're also excited to learn that Mini is also developing an electric John Cooper Works model. Unfortunately, that's all Mini has actually said about a future electric John Cooper Works model: that it's in development. Anything else about it, such as how hardcore it will be, or what motor it will use, is entirely up for speculation. All we have to go on are photos of the prototype. From the looks of it, the prototype is simply a Mini John Cooper Works (JCW) GP, but with an electric powertrain. The entire body, even the giant wing and funky fender flares, is the same as the uncompromising GP, except for the grille. The grille is the mostly solid example used on the Cooper SE. There aren't any tailpipes on this car either, for obvious reasons. This certainly suggests Mini is planning a mean electric JCW, and not just a slightly stiffer upgrade from the S/SE models. It raises big questions about the motor, though. The gas-powered GP is the most powerful production Mini in history with over 300 horsepower. Only one BMW motor has been used in a Mini so far: the base i3 motor, which makes 181 horsepower. The i3s has a punchier motor that makes 195 horsepower that would probably drop in easily, but it wouldn't seem powerful enough for a GP-type car. Perhaps the iX3's motor, which makes 286 horsepower, could fit? It would certainly be near enough to the GP's engine. Maybe even one of the motors from the dual-motor, 500-horsepower BMW iX would do the job? We'll just have to wait and see, and it's hard to say just how long, since Mini gave no information on reveals. Hopefully it won't be too long if the company is testing minimally camouflaged electric GP prototypes. Related Video: