2005 Mini Cooper S Convertible John Cooper Works Navigation Heated Seats 49k Mi on 2040-cars

Auto blog

Electric Mini tows a Boeing 777 airplane, because why not?

Car manufacturers seem to love hitching up to massive planes. Even Mini is getting onboard with the trend, and it's using a camouflaged version of the electric Mini on its way. Now, we saw the Mini Cooper S E completely uncovered a few days ago in spy photos, so make sure to check those out to see what the car will really look like. If it's the plane pulling you're after, watch the video above. Mini collaborated with Lufthansa on this one. The airliner provided a Boeing 777F freight aircraft for the stunt. That airplane has an unladen weight of approximately 150 tons, or just about 300,000 pounds. Needless to say, it's safely over whatever towing rating Mini is going to give its electric car. This Mini doesn't pull the airplane far, but it's enough to prove the brand's point: Electric equals lots of torque. Like we mentioned before, others have pulled off a similar stunt. A few notable examples include the Toyota Tundra towing the space shuttle for 12 miles, Porsche hauling an Airbus 380 with various Cayennes and then a Tesla Model X pulling a Boeing 787-9 Dreamliner. The Model X is most like Mini's stunt, since it's also an electric vehicle. We'll note that the airplane towed by the Mini is also far lighter than that towed by the Tesla. Still, to have enough torque and traction to move a 300,000-pound airplane is impressive, and if nothing else, it's entertaining to watch. Reports have indicated that the new electric Mini will share the BMW i3's powertrain and battery pack, so that means it may have required only 168 horsepower and 184 pound-feet of torque to pull this off.

Mini Electric Pacesetter will lead Formula E, hints at future JCW cars

Just a few days ago, Mini teased a wild electric hatchback with pace car-style lights. And just as we expected, it's the new safety car for Formula E. It's called the Mini Electric Pacesetter inspired by JCW, which is a mighty long name for such a little car. It looks like a blast, and although it's not exactly a production car or the direct forebear of a car that will be offered, it does hint that there will be high-performance electric Minis. Don't just take it from us, take it from the man in charge of Mini, Bernd Korber: "But it does reveal one of the directions we could take with the electrification of the JCW brand. For me, the message is clear: Electrification and John Cooper Works are a good fit." Mini made some major modifications to the Pacesetter to get it ready to lead race cars. It weighs 287 pounds less than the Mini Cooper SE that it's based on, giving it a total weight of 2,712 pounds. Much of that weight loss comes from the gutted interior, which now has a welded-in roll cage, race seats and six-point harnesses. While not particularly related to weight saving, the seats also have a neat 3D-printed material for the cushions that can be made in different colors and densities. The electric motor and battery are unchanged at 181 horsepower and 199 pound-feet of torque, but the weight loss means that it hits 62 mph in 6.7 seconds, an improvement of 0.6 over the road car. Handling and braking are upgraded with racing coilovers that have adjustments for compression, rebound, camber and ride height, as well as four-piston brake calipers. Mini John Cooper Works GP forged four-spoke wheels are fitted with 245-mm Michelin Pilot Sport tires. The wider track from the wheels necessitated the unique 3D-printed carbon fiber fender flares. The rear wing, which is similar but not identical to the GP unit, is also made of 3D-printed carbon fiber material. Splitters, side skirts and a large rear diffuser round out the aerodynamic tweaks. The car will make its racing debut at the Formula E event in Rome on April 10. And we hope we won't have to wait too long for an electric John Cooper Works model to reach the public. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2023 Mini Convertible Seaside Edition touts 30 years of Mini soft tops

There have been specialty vehicle shops creating convertible Minis since the 1960s. Heinz had Crayford Convertibles make 57 Mini droptops as part of a competition in 1966. But Mini didn't produce a factory-backed convertible until 1993, when parent company Rover sent cars to one of its German dealers that had already been producing its own soft tops for two years. BMW wouldn't buy Rover until 1994. That hasn't stopped the Munich firm from celebrating the 30th anniversary of the first official Mini 'drophead' with this, the 2023 Mini Convertible Seaside Edition. If you like your special editions to scream about their special-edition-ness, this one's for you — it's awash in graphics. Outside, the front bumper gets the special multihued blue graphic featuring a stylized number 30 created for this model. That graphic appears again on the side vent along with the word "Seaside" in orange. A twin coach line runs from that vent to the rear. The word Seaside appears again next to the passenger's side brake light, and yet again on the door sills with the twin pinstripe. The center caps? They say Mini. But they get the 30 graphic, and a newly available 18-inch wheel design meant to be "reminiscent of pulsating waves in the water." Even the key gets the special edition treatment as half of the fob is a deep blue, reworked into a thalassic-themed bit of sculpture that has the word Seaside hidden behind it. Inside the Carbon Black leather interior, Seaside shows up in orange on the sport steering wheel. The 30 graphic's been embossed into the instrument panel, accompanying the words "30 years of convertible" on the passenger's side. And a badge with the graphic adorns the floor mats,   The 2023 Mini Convertible Seaside Edition will be available from February of next year on the Cooper and Cooper S, and can be optioned in Nanuq White or Caribbean Aqua.