2005 Mini Cooper S Convertible on 2040-cars

Auto blog

Mini to offer a double-clutch transmission, but not in U.S.

Mini has padded next year's option sheet with a seven-speed dual-clutch transmission, so long as you're not buying in America. Available for the three-door, five-door, and convertible Mini models using "selected engine types," the DCT will provide a third transmission option after the standard six-speed manual and six-speed Steptronic automatic. Minis fitted the twin-clutch will be known by the meaty new gearshift lever that, BMW style, returns to its central position after the car's put into gear. A button at the top of the lever activates Park. Sensibly, you push the lever forward to downshift, and pull it back to upshift. When a buyer springs for navigation and the DCT, the transmission taps into map routing data and camera images to hone shift programming; the gearbox will downshift early when approaching a turn, or read a series of bends to know when to shift and when to hold steady. Fitted with a crawl function for ease of use in stop-and-go traffic, the DCT additionally supports stop/start, and coasting in Mid and Green driving modes for those times the driver takes his foot off the accelerator. For the time being, though, we're not invited to the party. Mini USA Communications Manager Mariella Kapsaskis told Motor1 that manufacturing the wet-clutch, dual-mass flywheel DCT "takes up lots of capacity." Which is the automaker equivalent of being told, "We're just not that into you right now." We expect that would change at some point; however, some of Mini's most sporting U.S. competitors also don't offer DCTs, so who knows. Related Video: Featured Gallery 2018 Mini Double-Clutch Transmission View 17 Photos Image Credit: Mini MINI Hatchback

Mini Minor to be co-developed with Toyota

It was back in 2011 when Mini first showcased the prospect of an even smaller hatchback with the Rocketman concept at the Geneva Motor Show. In the nearly four years since, parent company BMW has hemmed and hawed on the possibility of putting it into production, but the latest word from Europe has it that the project is a go. According to Automobile magazine, Mini is realigning its product portfolio into five pillars: the essential hardtop we've already seen (available in two/three- and four/five-doors), the convertible, the upcoming new Clubman wagon (coming this summer with full-size auxiliary suicide doors on both sides), the next-gen Countryman crossover in 2016 and two new model lines. One will be the production version of the Superleggera roadster concept, earmarked for 2018. The other will be the Minor, a smaller city car reviving a long-gone model name and presaged by the aforementioned Rocketman concept. But for that last one, Mini won't go it alone. To develop the mini Mini, BMW will reportedly turn to its partnership with Toyota. The relationship is already set to yield a new Supra and Z4 and share fuel cell and other technologies. But this would broaden the partnership to include a small hatchback. However rather than use the existing (or next-gen) Aygo, which is already built under joint venture with PSA Peugeot Citroen (with which BMW previously had a joint engine venture), word has it that the BMW and Toyota will develop a new platform for the project – one that will be used by both partners. The new product plan doesn't leave much room for the Mini Coupe and Roadster (which have already been discontinued), for the Paceman three-door crossover (which will suffer the same fate) or for the projected seven-seater minivan. But the addition of the new Superleggera roadster and super-mini Mini aren't likely to leave us wanting for either. Related Video:

BMW's Mini plant closes for 4 weeks for the Brexit that didn't happen

LONDON — BMW's Mini plant in Britain is closing for four weeks starting Monday in a move planned over a half year ago to help the company deal with any disruption resulting from Brexit, which has since been delayed. The German carmaker, which builds just over 15 percent of Britain's 1.5 million cars, moved its annual summertime shutdown to April to "minimize the risk of any possible short-term parts-supply disruption in the event of a no-deal Brexit." But Britain's departure from the EU has now been pushed back from March 29 until at least April 12 or potentially much later, scuppering the timing of major contingency plans for some carmakers. Shutdowns are organized far in advance so employee holidays can be scheduled and suppliers can adjust volumes, making them hard to move. "This is what our company and our workforce have planned for over many months, and it is fixed into our business planning," said a BMW spokesman. It represents the latest headache for Britain's once roaring car sector which had been on track for record production but since 2017 has posted sharp falls in sales, output and investment. The overwhelmingly foreign-owned industry has become increasingly incredulous as a stable and attractive investment environment descends into one of its deepest political crises, risking the free and frictionless trade the sector relies on. BMW's Rolls-Royce factory in Goodwood will close for two weeks whilst Jaguar Land Rover's (JLR) three car plants and engine facility and Honda's Swindon facility will also shut for a few days this month as part of Brexit contingencies. It has been a turbulent few months for the sector after Nissan canceled plans to build a new sport utility vehicle at its English Sunderland plant and Honda said it would shutter its plant in 2021 in the biggest blow to the sector for years. Toyota provided a rare boost when it announced plans to build cars for Suzuki at its English car plant. BMW, which is also closing its central English Hams Hall engine facility and Swindon press shop and sub-assembly site for four weeks, has said it could move some engine and Mini output out of Britain if there is not an orderly Brexit. Carmakers face a number of risks if there is a disorderly Brexit, including delays to the supply of ports and finished models, new customs bureaucracy, the need to recertify models and an up to 10 percent tariff on finished vehicles.