'06 Mini Cooper S Convertible 1.6l Supercharged on 2040-cars

Auto blog

Mini officially reveals Frozen Black Countryman and Paceman

BMW has been offering Frozen editions of its cars for several years now highlighted by matte paint and very limited production, and now Mini is getting in on the game with Frozen Black versions of the Paceman and Countryman. Unlike our report from earlier in the week, these models will not wear the Batman-sounding Black Knight name, but instead, like the BMW models, will be dubbed Frozen Edition. That previous intel also had it that production of the Frozen Edition Minis would be limited to just 60 units. Now official, Mini has not confirmed how many - or few - of these limited edition models it would build.
The Frozen Black paint adds silicates to the lacquer finish creating a "matted impression," which sounds like it should be easier for owners to maintain and wash, although Mini still advises against waxing or polishing. This special paint will be offered on all S, Diesel and John Cooper Works versions of the Paceman and Countryman, though it's not clear as of this writing if any will be offered in the US. Mini's press release for the Frozen Black Paceman and Countryman is posted below.

Did BMW drag its feet on Mini recall?

The National Highway Traffic Safety Administration is opening an investigation into BMW's reporting of a recall for 30,456 examples of the 2014-2015 Mini Cooper Hardtop, Cooper S, and the 2015 John Cooper Works. According to the government, "it appears from a review of NHTSA's databases that BMW may have failed to submit recall communications to NHTSA in a timely manner." The automaker issued the recall in July because crash tests showed the models didn't meet side impact requirements for passengers in the back seat. While there were no reported injuries at the time, the company decided to install energy-absorbing material in the space between the rear interior panels and the exterior. However, NHTSA has decided to investigate whether this campaign should have started much earlier, given the evidence the company had. According to the government's report, the Cooper Hardtop failed side-impact tests in 2014, although one of these tests was five-miles-per-hour faster than the Federal Motor Vehicle Safety Standard. The agency claims: "In January 2015 BMW verbally committed that it would conduct a service campaign to add padding to the rear side panels of MY 2015 Mini 2 Door Hardtop Cooper models. However, BMW did not initiate the service campaign and failed to inform NHTSA of its failure to do so." A subsequent crash test of an example with this fix showed it to make the vehicle compliant with the rules. Mini spokesperson Mariella Kapsaskis told Autoblog: "Regarding the NHTSA audit query, BMW Group is evaluating the request and will respond to NHTSA as appropriate." INVESTIGATION Subject : BMW Reporting & Timely Recall Execution Date Investigation Opened: SEP 24, 2015 Date Investigation Closed: Open NHTSA Action Number: AQ15004 Component(s): STRUCTURE All Products Associated with this Investigation Vehicle Make Model Model Year(s) MINI COOPER 2014-2015 MINI COOPER S 2014-2015 MINI JOHN COOPER WORKS 2015 Details Manufacturer: BMW of North America, LLC SUMMARY: NHTSA is opening this AQ to better understand and evaluate BMW's process(es) for its notification procedures and for timely and efficient execution of its safety recall campaigns. In mid-2014, NHTSA's New Car Assessment Program (NCAP) had side impact moving deformable barrier (MDB) tests performed on two model year (MY) 2014 Mini 2 Door Hardtop Coopers. These two tests were performed at a speed 5 mph higher than required by Federal Motor Vehicle Safety Standard (FMVSS) 214, Side impact protection.

The 2017 Porsche 911 RSR goes mid-engine, purists be damned

Porsche unveiled its World Endurance Championship and IMSA WeatherTech Championship competitor with the 2017 911 RSR. And this 911 is different from the rest, as the 4.0-liter flat-six engine powering this beast is in front of the rear axle, not behind it. That's right, this 24 Hours of Le Mans competitor ditches the iconic rear-engine layout. Porsche isn't talking specifics on how exactly things are arranged back there. The engine is new, now based on the 991 911's block instead of the previous Mezger motor that's been used for years. The transmission design is new as well – it would have to be to accommodate the new location relative to the engine. The racecar has been engineered to meet the LM-GTE class, where it will go up against other mid-engine cars like the Ford GT and Ferrari 488 GTE. Moving the engine to the middle has given Porsche the ability to fit the 911 RSR with massive bits of aero, like the humongous rear diffuser that looks like it would be more at home on a machine of war. The only thing that can compete with the diffuser for size is the top-mounted rear wing, which shares a similar design to the one found on the 919 Hybrid. Going back to the engine, the direct-injected boxer motor, depending on the size of the restrictor, generates as much as 510 horsepower and sends all of its fury to the rear wheels. The engine is paired to a six-speed sequential gearbox, which drivers can employ through paddles on the steering wheel. The new engine doesn't have a lot of weight to push around as the 911 RSR, as required by regulations, weighs 2,740 pounds. Speaking of weight, the engine layout isn't the only change for the 911 RSR. For 2017, the car ditches its steel body for one that's made out of carbon fiber. The body attaches to the chassis via quick-release fasteners, making the vehicle easier to service as exterior elements can be removed with minimal effort. The racecar also gets a radar-based collision system – aptly named the "Collision Avoid System" – which is meant to limit the 911 RSR's encounters with faster LMP prototypes. Only time will tell if the new layout and aerodynamic components help the 911 RSR beat its competition. But there will be plenty of opportunities to see the racecar in action as Porsche plans to run the 911 RSR in 19 races during the 2017 season, the first of which will take place at the IMSA opener on January 28th at Daytona, where the racecar will make its track day debut.