2013 - Mini Cooper S on 2040-cars

Auto blog

Next Mini Clubman nearly ready to haul

With the three- and five-door Mini Hardtop models successfully hitting the market and the pending arrival of the hot John Cooper Works model at next week's Detroit Auto Show, Mini can turn its eye toward another important model, in the form of its next-generation Clubman, which our spies have spotted testing on the roads of Germany. Aside from the rear barn doors, the next Clubman looks to have a lot in common with the new five-door Hardtop, which makes sense considering how much the current car has in common with the R56 that it's based upon. That similarity ends quickly once you take a look inside the cabin. The typically open Mini cabin is more dramatically segmented in the new Clubman, with a high transmission tunnel that separates the driver and passenger. In a worrying move for fans of parking lot shenanigans, Mini is moving to an electronic parking brake in its new model, although beyond that, the center stack is similar to the redesign Mini pushed through for this latest generation. As is the case with the current Clubman, the next-gen will likely share its engines and gearboxes with the Hardtop, meaning a base 1.5-liter, three-cylinder turbo in the Cooper Clubman and a 2.0-liter, turbocharged four-cylinder in the Cooper S Clubman. Six-speed transmissions, in both two- and three-pedal varieties, will likely also be offered. Check out our gallery of spy photos of the new Clubman, up at the top of the page.

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

BMW recalls 6,073 units of i3 and Minis to replace airbag

BMW is replacing the passenger's side front airbag module on 6,073 vehicles in the US because of a supplier's manufacturing issue with the part. The affected models include the: 2014-2015 i3; 2014-2016 Mini Hardtop 2 Door Cooper and Cooper S; 2015-2016 Hardtop 2 Door John Cooper Works; and 2015-2016 Hardtop 4 Door Cooper and Cooper S. Because the airbag components aren't made correctly, they might not deploy with enough restraint in a low-speed collision. BMW isn't aware of any accidents or injuries from the problem, but this is still obviously a safety concern. According to company spokesperson David Buchko to Autoblog, customers will be notified about the issue by mail in November. As always, dealers will perform the replacements at no cost to owners. Related Video: RECALL Subject : Passenger Frontal Air Bag May not Deploy Properly Report Receipt Date: OCT 07, 2015 NHTSA Campaign Number: 15V628000 Component(s): AIR BAGS Potential Number of Units Affected: 6,073 All Products Associated with this Recall Vehicle Make Model Model Year(s) BMW I3 2014-2015 MINI COOPER 2014-2016 MINI COOPER S 2014-2016 MINI JOHN COOPER WORKS 2015-2016 Details Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2014-2016 MINI Cooper S and MINI Cooper two-door vehicles, 2015-2016 MINI John Cooper Works and MINI Cooper S and MINI Cooper four-door vehicles and 2014-2015 BMW i3 vehicles. Due to a manufacturing error, the passenger frontal air bag may not deploy properly in a low speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection." CONSEQUENCE: In the event of a vehicle crash, an air bag that does not deploy properly increases the risk of injury to the front seat passenger. REMEDY: MINI and BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall is expected to begin on November 20, 2015. Owners may contact MINI customer service at 1-866-825-1525 and BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. BMW Statement: BMW has informed NHTSA of its intention to voluntarily recall approximately 923 BMW i3 vehicles to replace the passenger-side front airbag module.