2009 Used Turbo 1.6l I4 16v Manual Fwd Convertible Premium on 2040-cars

Auto blog

Mini teases one-box concept — a Mini-van

Mini appears poised to unveil its first van concept if this just-released teaser image is anything to go by. The brand showed a teaser image for the Vision Urbanaut on Twitter, calling the vehicle "an urban oasis." https://twitter.com/MINI/status/1328352146224418816?s=20 Mini previously offered a panel-van version of the Clubman, but the Urbanaut concept appears to be a much differerent one-box design. Its ultra-short frontal area suggests it does not utilize the current Mini platform. Instead, this is likely an EV, with its batteries packaged under the floor. The concept, then, could also debut a new dedicated EV platform for Mini. (Mini's current electric car, the Cooper SE, is a battery-powered version of the standard Mini hardtop.) Based on its profile, the Urbanaut concept does not appear to be a preview of any of the future models the brand has recently discussed. Those include two new crossovers, a BMW X1–sized model that revives the Paceman nameplate and a second entry built on BMW's RWD platform and possibly called Traveler. However, the brand also mentioned adding more EVs, and that could be where the Urbanaut fits in. Of course, the Urbanaut also could end up going nowhere, like the Rocketman concept that failed to launch. Still, a tiny-sized van does strike us as an intriguing and brand-correct new model for Mini — certainly more so than another large-ish crossover. We'll be interested to learn more about the Urbanaut. Related Video:

BMW's Mini plant closes for 4 weeks for the Brexit that didn't happen

LONDON — BMW's Mini plant in Britain is closing for four weeks starting Monday in a move planned over a half year ago to help the company deal with any disruption resulting from Brexit, which has since been delayed. The German carmaker, which builds just over 15 percent of Britain's 1.5 million cars, moved its annual summertime shutdown to April to "minimize the risk of any possible short-term parts-supply disruption in the event of a no-deal Brexit." But Britain's departure from the EU has now been pushed back from March 29 until at least April 12 or potentially much later, scuppering the timing of major contingency plans for some carmakers. Shutdowns are organized far in advance so employee holidays can be scheduled and suppliers can adjust volumes, making them hard to move. "This is what our company and our workforce have planned for over many months, and it is fixed into our business planning," said a BMW spokesman. It represents the latest headache for Britain's once roaring car sector which had been on track for record production but since 2017 has posted sharp falls in sales, output and investment. The overwhelmingly foreign-owned industry has become increasingly incredulous as a stable and attractive investment environment descends into one of its deepest political crises, risking the free and frictionless trade the sector relies on. BMW's Rolls-Royce factory in Goodwood will close for two weeks whilst Jaguar Land Rover's (JLR) three car plants and engine facility and Honda's Swindon facility will also shut for a few days this month as part of Brexit contingencies. It has been a turbulent few months for the sector after Nissan canceled plans to build a new sport utility vehicle at its English Sunderland plant and Honda said it would shutter its plant in 2021 in the biggest blow to the sector for years. Toyota provided a rare boost when it announced plans to build cars for Suzuki at its English car plant. BMW, which is also closing its central English Hams Hall engine facility and Swindon press shop and sub-assembly site for four weeks, has said it could move some engine and Mini output out of Britain if there is not an orderly Brexit. Carmakers face a number of risks if there is a disorderly Brexit, including delays to the supply of ports and finished models, new customs bureaucracy, the need to recertify models and an up to 10 percent tariff on finished vehicles.

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.