2003 Mini Cooper Hatchback Super Low Miles Great Condition on 2040-cars

Auto blog

Porsche tops JD Power APEAL study for 12th time

JD Power's 2016 Automotive Performance, Execution, and Layout (APEAL) study hasn't changed much this time around with Porsche coming in at No.1 for the 12th consecutive year, while BMW was close behind in second. Jaguar and Mercedes-Benz tied for third with Land Rover, Lexus, and Lincoln tied for No.5. The APEAL Study, according to JD Power, measures owners' level of excitement and emotional attachment across 77 parameters. Brands and cars are rated on a 1,000-point scale. The study found that new cars with modern safety features including low speed collision avoidance and blind spot monitoring have higher APEAL scores than vehicles without the features. The overall industry score increased from 798 to 801, which JD Power claims was helped by the launch of a variety of new vehicles. This year, 22 out of 30 new or redesigned cars received a higher score than the vehicle's respective segment average. Porsche is once again at the top of the list as the automaker's score increased by three points to 877. BMW outscored Jaguar to take second place with a score of 859, while the British automaker dropped three points from last year with 852 points. Volkswagen overtook Mini to become the top-ranked non-premium brand with 809 points, while the latter automaker trailed behind by one point. At the end of the scale, Smart came in at the very bottom for the second year in a row with a score of 745 points, which represents an increase of 62 points over last year. Fiat's score increased by six points to 755, but still confined the automaker to second-to-worst place for a consecutive year. Mitsubishi's score increased to 770, up from 755, to become the fourth-worst brand, while Jeep fell to third-worst with a decrease in seven points to 756. General Motors received six segment-level awards, followed by Hyundai with five, and BMW and VW earning four apiece. Surprise segment victories include the Chevrolet Camaro, which outscored the Dodge Challenger, and the Lexus RC which ranked above the BMW 4 and 3 Series. For more information on how the automakers ranked, check out the official release on the 2016 APEAL Study below or visit JD Power's website to analyze the graphs. Related Video: Porsche Ranks Highest in APEAL for 12th Consecutive Year; General Motors Receives Six Segment-Level Awards, Hyundai Motor Company Receives Five DETROIT: 27 July 2016 — Popular driver-assist technologies help make vehicles considerably more appealing to their owners, according to the J.D.

Mini teases one-box concept — a Mini-van

Mini appears poised to unveil its first van concept if this just-released teaser image is anything to go by. The brand showed a teaser image for the Vision Urbanaut on Twitter, calling the vehicle "an urban oasis." https://twitter.com/MINI/status/1328352146224418816?s=20 Mini previously offered a panel-van version of the Clubman, but the Urbanaut concept appears to be a much differerent one-box design. Its ultra-short frontal area suggests it does not utilize the current Mini platform. Instead, this is likely an EV, with its batteries packaged under the floor. The concept, then, could also debut a new dedicated EV platform for Mini. (Mini's current electric car, the Cooper SE, is a battery-powered version of the standard Mini hardtop.) Based on its profile, the Urbanaut concept does not appear to be a preview of any of the future models the brand has recently discussed. Those include two new crossovers, a BMW X1–sized model that revives the Paceman nameplate and a second entry built on BMW's RWD platform and possibly called Traveler. However, the brand also mentioned adding more EVs, and that could be where the Urbanaut fits in. Of course, the Urbanaut also could end up going nowhere, like the Rocketman concept that failed to launch. Still, a tiny-sized van does strike us as an intriguing and brand-correct new model for Mini — certainly more so than another large-ish crossover. We'll be interested to learn more about the Urbanaut. Related Video:

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.