2010 Mini S/manual/heated Seats/pano Roof on 2040-cars

Auto blog

David Brown Automotive remasters classic Mini at maxi price

Just days ago, we reported that the British small-scale maker of luxurious, Aston Martin inspired coupes, David Brown Automotive, was about to introduce a new, cheaper vehicle positioned under its exquisitely priced Speedback GT model. Since the Jaguar-based Speedback GT costs a significant $753,000, there's quite a bit of room underneath it to introduce a more modest means of transport, without cheapening out. Now, details of the car, dubbed "Project 2," have surfaced, and it's quite a surprise. What David Brown Automotive has come up with is a "remastered," rethought classic Mini. While the car looks just like a Mini at a passing glance, the body panels along with the chassis are new, and the car has been given a smoothening. All the body seams that were commonplace on the classic original have been rounded off, and the interior is a custom job complete with plentiful leather and Pioneer touchscreen. The new dashboard is a little closer to Japanese retro cars than either the classic Mini or the current, BMW-made equivalent. The drivetrain remains the trusted 1,275cc original along with a four-speed gearbox; both are reconditioned units instead of box-fresh ones, but they feature brand-new parts. There's 79 horsepower on offer, which is plenty of poke for a Mini. Each of the cars will take about 1,000 hours to make, by hand. The plan is to build 100-200 of these Mini re-creations per year, at David Brown's new facility in Silverstone, England. In two years, only 11 Speedbacks have been built, so the Mini should create a bit more buzz at the workshop. But the price? Starting from $62,000 at current rates, going all the way to $86,000 if you want one with all the trimmings. A lot for a Mini, but it's going to be special. Related Video:

Porsche tops JD Power APEAL study for 12th time

JD Power's 2016 Automotive Performance, Execution, and Layout (APEAL) study hasn't changed much this time around with Porsche coming in at No.1 for the 12th consecutive year, while BMW was close behind in second. Jaguar and Mercedes-Benz tied for third with Land Rover, Lexus, and Lincoln tied for No.5. The APEAL Study, according to JD Power, measures owners' level of excitement and emotional attachment across 77 parameters. Brands and cars are rated on a 1,000-point scale. The study found that new cars with modern safety features including low speed collision avoidance and blind spot monitoring have higher APEAL scores than vehicles without the features. The overall industry score increased from 798 to 801, which JD Power claims was helped by the launch of a variety of new vehicles. This year, 22 out of 30 new or redesigned cars received a higher score than the vehicle's respective segment average. Porsche is once again at the top of the list as the automaker's score increased by three points to 877. BMW outscored Jaguar to take second place with a score of 859, while the British automaker dropped three points from last year with 852 points. Volkswagen overtook Mini to become the top-ranked non-premium brand with 809 points, while the latter automaker trailed behind by one point. At the end of the scale, Smart came in at the very bottom for the second year in a row with a score of 745 points, which represents an increase of 62 points over last year. Fiat's score increased by six points to 755, but still confined the automaker to second-to-worst place for a consecutive year. Mitsubishi's score increased to 770, up from 755, to become the fourth-worst brand, while Jeep fell to third-worst with a decrease in seven points to 756. General Motors received six segment-level awards, followed by Hyundai with five, and BMW and VW earning four apiece. Surprise segment victories include the Chevrolet Camaro, which outscored the Dodge Challenger, and the Lexus RC which ranked above the BMW 4 and 3 Series. For more information on how the automakers ranked, check out the official release on the 2016 APEAL Study below or visit JD Power's website to analyze the graphs. Related Video: Porsche Ranks Highest in APEAL for 12th Consecutive Year; General Motors Receives Six Segment-Level Awards, Hyundai Motor Company Receives Five DETROIT: 27 July 2016 — Popular driver-assist technologies help make vehicles considerably more appealing to their owners, according to the J.D.

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.