1980 Mini Cooper: Austin Mini Classic **total Restoration** on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini recalls 30K Hardtops to improve side-impact protection

Mini is recalling 30,456 units of its two-door models because they don't conform to federal side-impact requirements for the rear seat passengers. According to the documents submitted to the National Highway Traffic Safety Administration (here as a PDF), this includes 15,653 examples of the 2014-2015 Mini Cooper Hardtop, 14,782 units of the 2014-2015 Mini Cooper S Hardtop, and 21 of the 2015 Mini John Cooper Works Hardtop (pictured above). Those with production dates between December 2013 and March 2015 are affected, the automaker reports in a statement to Autoblog. According to NHTSA, the agency tested a 2015 Cooper and Cooper S Hardtop on July 1 and 2, but the S didn't meet one of the impact requirements. The analysis showed that rear passengers in these vehicles were potentially in greater danger in a crash. Upon further research, the government and Mini found more models potentially affected. The automaker isn't aware of any reports of accidents or injures from this problem. To rectify the situation, dealers will add more energy-absorbing material in the space between the rear interior panels and the exterior of the hatchbacks, which will take around four hours. The campaign to fix them will begin on Sept. 12. RECALL Subject : Side Impact Crash Worthiness/FMVSS 214 Report Receipt Date: JUL 17, 2015 NHTSA Campaign Number: 15V450000 Component(s): STRUCTURE Potential Number of Units Affected: 30,456 All Products Associated with this Recall Vehicle Make Model Model Year(s) MINI COOPER 2014-2015 MINI COOPER S 2014-2015 MINI JOHN COOPER WORKS 2015 Details Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2014-2015 MINI Cooper and MINI Cooper S Hardtop 2 Door vehicles and 2015 MINI John Cooper Works Hardtop 2 Door vehicles. The affected vehicles do not meet the side impact performance requirements for the rear seat passengers. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 214, "Side Impact Protection." CONSEQUENCE: If the side impact performance requirements are not met, rear seat passengers may be at a higher risk of injury during a crash. REMEDY: MINI will notify owners, and dealers will install additional energy absorption material between the rear interior side panels and the exterior vehicle body, free of charge. The recall is expected to begin September 12, 2015. Owners may contact MINI customer service at 1-866-825-1525.

Mini reveals new John Cooper Works concept ahead of Detroit

BMW effectively hit the reset button when it unveiled the new Mini at the LA Auto Show last month, opening the door to a whole raft of new variants to follow - and this is the first.
Set to be unveiled at the Detroit Auto Show next month is the new Mini John Cooper Works Concept, a show car that previews the next hot hatch from the Anglo-Saxon automaker. Mini isn't saying much about what makes it tick, focusing instead of the design that sets it apart from the standard version we've already seen.
This JCW concept features a lustrous grey paintjob with bright red accents, 18-inch alloys and an upgraded aero kit, all aimed at making the Mini look that much sportier. It's got bigger air intakes where the fog lights would be, LED headlamps, a black grille frame, side skirts, a rear bumper with diffuser insert and a roof-mounted spoiler.