1979 Classic Mini Cooper Leland on 2040-cars

Auto blog

Mini JCW arrives suitably early thanks to Aussie leak [UPDATE]

UPDATE: Mini has released official photos and details of the new John Cooper Works, which we've added above and below, respectively. Mini is set to reveal its most powerful model yet in the new John Cooper Works hot hatch, but before the Anglo-Saxon automaker has gotten the chance, the first images and details have leaked out, courtesy of CarAdvice.com.au. According to the Australian website, the new JCW packs a 2.0-liter turbo four with 228 horsepower and 236 pound-feet of torque – outstripping even the previous John Cooper Works GP hot hatch, which produced 211 hp and 207 lb-ft. That's said to be good for a 0-62 time of 6.1 seconds. Of course there's more to the new JCW than engine output, and the latest Mini hot hatch – previewed in concept form almost a year ago at the 2014 Detroit Auto Show and spied undergoing testing mere weeks ago – also packs an upgraded version of the suspension in the Cooper S, with optional adaptive dampers, Brembo brakes, upgraded rolling stock and an electronic differential. A full aero kit sets it apart visually, keep the greasy bits cool and the nimble little pocket rocket glued to the tarmac, while the cockpit has also appears to have been made over to provide a suitable environment from which to unleash the new JCW's performance potential. With these details and images spreading like wildfire across the interwebs, we'd imagine it's only a matter of time before Mini releases the full monte itself, so watch this space for more. Related Video: The new MINI John Cooper Works. 10.12.2014 - Green light for the latest edition of the top athlete in the small car segment; the new MINI John Cooper Works combines authentic race feeling with the premium characteristics and extended product substance of the latest MINI Generation; distinctive, tradition-steeped, based on a vehicle concept combining MINI and John Cooper Works, with performance qualities which are exceptional within the competitive environment. - Extreme driving fun and exclusive charisma based on technology for engine, suspension and aerodynamics derived directly from motor racing as well as model-specific design features for the exterior and interior; greater differentiation from the MINI 3 door highlights the model's individual character.

Next BMW X1 moving to smaller, lighter FWD-biased platform

BMW's decision to make the upcoming 2-Series Active Tourer front-wheel drive has been polarizing to say the least, but like it or not, that is the direction the company will go in the near future - one rumor put the number as high as 23 front-wheel-drive models for Mini and BMW combined. The next-generation X1 won't send all its power to the front wheels, though, when it launches in early 2016. While it will use the same platform as the Active Tourer, rumors suggest all models will use all-wheel drive - at least at launch.
A "high-ranking," unnamed BMW manager confirmed to AutoWeek that the new model will switch to transversely-mounted three- and four-cylinder engines and the same six-speed manual and eight-speed automatic transmissions as the Active Tourer. The new, smaller platform will allow for more efficient packaging, and despite the smaller size, interior space will remain comparable. All the changes should make it significantly lighter too.
Don't start wailing just yet because BMW surely won't be entirely abandoning sporty models. AutoWeek claims that the Bavarians are working on a higher-output version of the 2.0-liter turbocharged four-cylinder with power closer to 300 horsepower, about a 72-hp boost. It's also rumored to offer a sporty version of the X1 that may be called the X2.

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.