Mercury Other Town Sedan on 2040-cars

Auto blog

More than 800,000 Fords recalled for faulty Takata airbags

The Basics: Ford is recalling about 816,000 Ford, Lincoln, and Mercury vehicles built in the US for faulty passenger-side Takata airbags. The affected vehicles were all built in North America, with 654,695 recalled vehicles in the US and 161,174 vehicles in Canada. A wide variety of cars, trucks, and SUVs are affected. This is a planned expansion of an earlier recall. 2005-09 and 2012 Ford Mustang 2005-06 Ford GT 2006-09 and 2012 Ford Fusion 2007-09 Ford Ranger 2007-09 Ford Edge 2006-09 and 2012 Lincoln Zephyr and Lincoln MKZ 2007-09 Lincoln MKX 2006-09 Mercury Milan The Problem: Like every other Takata recall, the problem rests with faulty airbags that can potentially expel shrapnel, injuring or killing vehicle occupants. Millions of vehicles from dozens of automakers are affected, so don't think that Ford is alone on this one. Injuries/Deaths: Ford stated in a press release that there have been no injuries or death linked to the vehicles in this recall. All in all, 11 deaths and 180 injuries across a variety of automakers have been linked to these Takata airbags. The fix: Ford will contact owners soon, and the affected vehicles will have their airbags replaced by a dealer at no additional charge. If you own one: Wait for contact from Ford, then head to the dealer to get a replacement. If you're wondering if your vehicle is affected, go to this Ford website and enter their Vehicle Identification Number (VIN). The recall reference number is 17S01. Related Video: News Source: FordImage Credit: Associated Press Recalls Ford Lincoln Mercury Auto Repair Ownership Safety Truck Coupe Crossover SUV Sedan airbag Takata airbag recall

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.