1968 Mercury Monterey Base 6.4l on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Junkyard Gem: 1995 Mercury Tracer Trio

With the rise of Radwood, cars with exaggerated characteristics associated with the 1980s and 1990s are cool again. That means some combination of pastel and/or neon colors, squiggly squeezed-from-toothpaste-tube graphics, nonfunctional decklid spoilers, giant TURBO badging, and kicky youth-centric nomenclature are required if you want your wheels to be considered in compliance with the sacred tenets of Radism. I do my best to find rad machinery while crawling around in car graveyards, and since I came of driving age in 1982 I know a bit about the subject. Today's rare Junkyard Gem shows us the Mercury Division's belated attempt to sell fun cars to rad-leaning youngsters: a Tracer Trio, found in a Denver yard a few weeks back. The Trio package added 310 bucks to the cost of the $11,280 base Tracer sedan (that's about $575 on a $20,925 car in 2022 dollars), and it got the hip-and-trendy young buyer a leather-wrapped steering wheel, seven-spoke wheels, a decklid spoiler and these rad fender badges. I'm going to say that the much louder graphics and candy-cane-colored displacement badges on the Pontiac Sunbird W25 out-radded the Tracer Trio by a mile, but then Pontiac generally out-radded everyone in those days. Even Plymouth got into the act with such radness as the Breeze Expresso and Sundance Duster (we'll overlook the anti-rad Horizon Miser here). Perhaps tellingly, Mercury, Pontiac and Plymouth all got the "Old Yeller" treatment not long after the Rad Era ended. The Tracer name always went on Mercuries built on Mazda platforms, starting with the Australia-built, Ford Laser-based 1987-1989 cars and then continuing with Mexico-assembled, Ford Escort-based 1991-1996 cars. That generation of Escort/Tracer was mechanical twins with the Mazda Protege, itself the bridge between the 323 and the Mazda3. Some Tracers got the a 1.8-liter Mazda engine that was related to the Miata's engine, but this one has the pure-Detroit CVH 1.9. You're looking at 88 horsepower right here; the Mazda 1.8 offered 127 horses. At least the original buyer of this car got the base five-speed manual transmission instead of forking over $815 extra (about $1,510 today) for the four-speed slushbox. As a 29-year-old slacker living in San Francisco's Mission District and driving a hooptie '65 Chevy Impala sedan at the time, I would have taken the manual transmission without the Trio package, had I been forced to buy a new Tracer.

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.