1954 Mercury Woodie on 2040-cars

Auto blog

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Junkyard Gem: 1973 Mercury Marquis Brougham 4-Door Pillared Hardtop

Ford's Mercury Division debuted the Marquis in the 1967 model year, as a sporty coupe based on a stretched Ford LTD chassis. When the LTD got an update for 1969, so did the Marquis, and production of that generation of the top-of-the-line Mercury continued through 1978 (the Grand Marquis hit streets the following year). The 1969-1978 Marquis was a big, imposing land yacht, and the Brougham version came absolutely loaded with affordable luxury. Today's Junkyard Gem is a Marquis Brougham from the first year of the Malaise Era, found in a Phoenix self-service car graveyard recently. This car appears to have spent decades sitting outdoors in one of the harshest climates in the country, and so it's in rough shape. The vinyl top received the full thermonuclear treatment and is mostly obliterated by now. The interior got thoroughly cooked as well. Still, its original opulence shines through if you use some imagination. What hurts is that this car was packed with most of the good options, including the mighty 460-cubic-inch (7.5-liter) V8 engine with four-barrel carburetor. The price for the 460 was just $76 in this car, or around $548 in today's money. The base engine was a 429 (7.0-liter). Power numbers were way down for 1973 when compared to a couple of years earlier, partly as the result of tightening emissions standards but mostly due to the switch from gross to net power ratings that began midway during 1971 and was completed by the end of 1972. This engine was rated at 202 horsepower and 330 pound-feet. The only transmission available was a three-speed automatic. We can assume that the original buyer of this car and its single-digit fuel economy had a rough time when the OPEC oil embargo hit in the fall of 1973. Believe it or not, air conditioning was not standard equipment on the '73 Marquis Brougham (you had to move up to a Lincoln for that). This one even has the automatic temperature control feature, adding a total of $508 to the cost of this car (about $3,661 in 2023 dollars). That AM/FM/8-track radio—or, in fact, any radio—was an extra-cost option as well, with a price tag of $363 ($2,616 after inflation). The MSRP for the 1973 Marquis Brougham sedan (known as a "pillared hardtop" thanks to the frameless window glass) was $5,072, which comes to $36,555 in today's dollars. Obviously, its out-the-door cost would have been much higher with all the options.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.