1954 Mercury Monterey Fully Restored Less Than 1000 Miles Original California on 2040-cars

Auto blog

Junkyard Gem: 1992 Mercury Grand Marquis LS

We've all been seeing the instantly familiar Ford Crown Victoria P71 Police Interceptor on North American roads for what seems like forever, though in fact the very first of the aerodynamic Crown Vics didn't appear until a mere 31 years ago. Yes, after more than a decade of boxy LTD Crown Victorias, Dearborn took the late-1970s-vintage Panther platform and added a brand-new, Taurus-influenced smooth body and modern overhead-cam V8 engine, giving us the 1992 Ford Crown Victoria. The rule was, since 1939, that (nearly) every Ford model needed a corresponding Mercury, and so the Mercury Division applied different grille and taillights and the rejuvenated Grand Marquis was born. Here's one of the first of those cars to be built, now residing in a Denver-area self-service boneyard. The Marquis name goes respectably far back, to the late 1960s and a Mercurized version of the Ford LTD hardtop. The Grand Marquis began life as the name for an interior trim package on the 1974 Marquis Brougham (also LTD-based), eventually becoming a model in its own right for the 1979 model year. Today's Junkyard Gem came off the Ontario assembly line in March 1991, making one of the very first examples built. For 1992 (and through 2011), the Grand Marquis was a Crown Victoria with slightly enhanced bragging rights. This one has the top-grade LS trim, with an MSRP of $20,644 (that's about $44,370 in inflation-adjusted 2022 dollars). The corresponding Ford-badged model (built on the same assembly line by the same workers) would have been the Crown Victoria LX, which actually cost a bit more: $20,987 ($44,910 now). The very cheapest civilian 1992 Crown Vic cost just $19,563 ($42,045 today). There weren't any powertrain differences between the Crown Victoria and Grand Marquis in 1992. The only engine available was this Modular 4.6 SOHC V8, rated at either 190 (single exhaust) or 210 (dual exhaust) horsepower. The transmission was a four-speed automatic with overdrive. How many miles are on this one? Can't say! Based on the worn-out interior, I'm going to guess 221,719 miles passed beneath this car's wheels during its 32-plus years on the road. I've seen some very high-mile Police Interceptors, of course, including one with 412,013 miles, but Ford didn't go to six-digit odometers in the Grand Marquis until a bit deeper into the 1990s. Thanks to flawed speech-to-text applications on smartphones, the Grand Marquis is known as the "Grandma Keith" to many of us today.

Junkyard Gem: 1979 Mercury Marquis 2-Door Sedan

As the creator of the now-much-overused term "Malaise Era" (which I say started in 1973 and ended in 1983, full stop), I have a certain affection for the big two-door Detroit cars of the late 1970s. When such a car is built on the very first model year of Ford's long-lived Panther platform and I find one in a junkyard, I must document it. The 1979 Mercury Marquis is such a car, and this one was found in a San Francisco Bay Area self-service yard last month. Since Ford built the Grand Marquis all the way through the demise of the Panther platform— and Mercury itself— in 2011, it's easy for us to forget that the model name started out as just the plain old Marquis, back in the 1967 model year, with the Grand appellation used for the car's top trim level. While today's Junkyard Gem has some of the features of the Grand Marquis and Marquis Brougham trim levels for 1979 (notably the padded vinyl landau roof and power windows), it lacks the huge chrome lower-body moldings of those cars. Instead, it's a regular Marquis 2-door sedan with a big load of expensive options. That landau roof has suffered greatly from its decades beneath the vinyl-disintegrating California sun. The Panther platform was a big technological upgrade from the late-1950s-vintage chassis technology of full-sized Fords of the 1960s and 1970s, and it stayed in front-line service in much the same form through 2011. Though its ride and handling were much improved, the 1979 Marquis was quite a bit smaller than its predecessors, and that caused some grumbling among Mercury shoppers. Some ham-handed junkyard shoppers really tore up the interior of this car while extracting a few bits and pieces, but we can still admire the Pine Green pleather of the glorious Twin Comfort Lounge front seats. You had two engine choices when buying a new '79 Marquis: the base 302-cubic-inch (5.0-liter) Windsor V8 making 129 horsepower or the optional 351-cubic-inch (5.8-liter) Windsor V8 rated at 138 horsepower. This one appears to be the 351, the same engine as had been swapped into the pizza-delivery Mercury I drove in the middle 1980s. New cars sold in California around this time had these giant emissions-numbers stickers on the side glass. Later, they went on the underside of the hood.

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.