2010 Mercury Mariner Blk Was In Accident Driver Side Front End Damage,negotiable on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

This Mercury Cougar Eliminator is a lovely '69 survivor

If you have an overachieving brother/sister/cousin/friend (or whoever), you might know this feeling well; it can be tough to live up to those standards. In many ways, that notion can also describe the Mercury Cougar and its pioneering Ford Mustang sibling. Quite the act to follow, no? Happily though, the Cougar proved to be different enough from its Mustang relative to make a big splash, and perhaps no more so than in its racy "Eliminator" trim, new for 1969. This is one such heady Mercury, dressed in sporty Competition Orange paint, and claimed to be an unrestored "survivor." Need it in your life? The '69 Mercury Cougar Eliminator recently popped up on eBay in Chepachet, Rhode Island . The genesis of the Mercury Cougar began in 1967, really with one singular purpose—to bridge the gap between the Ford Mustang and the Ford Thunderbird with a more upscale, stylish, and chiefly more "European" feeling pony car. It's safe to say the Cougar fit the bill. Using the Mustang chassis as a base, the early Cougars were about three inches longer than their 'Stang cousins and offered better legroom, sleek front and rear fascias, and a more luxe interior. Don't mistake "upscale" for "soft" however; come 1969 the Eliminator package gave the Cougar a seriously mean attitude. Spec-up the interior package and you received high-back bucket seats, a Rallye clock, wood-rimmed steering wheel, and padded interior moldings among other custom trims. Outside is where the Eliminator really struts its stuff, though. Eliminators came equipped with a blacked-out grille, special steel wheels, an aggressive front splitter and rear wing, plus racy decals and side stripes. Four color choices were available — Competition Orange, Bright Blue Metallic, White, and Bright Yellow. As standard, the '69 Mercury Cougar Eliminator came equipped with a 351 cubic inch V8, boasting 290 horsepower, as seen in the case of this car. More powerful options were also available, as noted by Barnfinds, which included a big 390 cubic inch V8 (320 hp), a high-revving Boss 302 V8, and the gargantuan 428 Cobra Jet V8. Peek beneath the body of this Cougar and the 351ci V8 is hooked up to a desirable close-ratio four-speed manual transmission, showing a claimed 35,243 miles. Though the mileage isn't verified, the car's overall condition and wear would suggest the readings to be true. Befitting those low miles, this unrestored Cougar does carry quite the high price — a tall $32,000.

Junkyard Gem: 1970 Mercury Cougar

The plot of the Mercury Cougar story took a lot of strange twists and turns during its 35 or so years, from ponycar to immense luxobarge to family sedan to station wagon to Integra competitor. Examples of the first Cougar generation are nearly extinct in American wrecking yards, so I was excited to spot this one in Denver. Lest you shed any tears over this car going to the crusher, know that it was suffering from the ravenous teeth of the Rust Monster long before it got here. The 1967-1970 Cougar was based on the Mustang platform of the same era, and so it was a sleeker and quicker cat than its successors. Still, the longer wheelbase, extra equipment and all the cool-looking bodywork added some heft; the 1970 Mustang hardtop with V8 scaled in at 2,923 pounds, while the 1970 Cougar weighed 3,307 pounds. The current Ford Focus would fit just between those two weights. There was also a mid-cycle refresh in that era, with the '67-'68 and '69-'70 having different exterior styling and interiors. The '69 and '70 had different front end styling as well, with the latter re-adopting the vertical grille slats featured on the earlier model years. The '69 has horizontal slats. The drivetrain and just about everything else of value has been shorn from this car, perhaps before it arrived in this yard. In 1970, a bewildering assortment of V8 engines was available in the Cougar, including a Boss 302, two completely different 351s, and a 335-horse Cobra Jet 428. The base engine was a 351 Windsor making 250 gross horsepower. Since car rooftops mostly don't rust, why would someone cut out this one? Sheet metal needed for patching a leaky shed roof, perhaps? This 2005-2006 Denver Nuggets window sticker indicates that the car was on the street (probably) as recently as 11 years ago. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. It's savage. It's cool. It's primitive. It's sleek. It's wild. It's elegant. Password for action in the 70s! Featured Gallery Junked 1970 Mercury Cougar View 18 Photos Auto News Mercury