2009 Mercury Mariner Hybrid Sunroof Leather Nav 76k Mi Texas Direct Auto on 2040-cars

Auto blog

Junkyard Gem: 1973 Mercury Montego MX Brougham Sawzall Convertible Edition

You know how it goes— the weather is warm, you want to do some top-down driving, and you lack a proper convertible... but you do have a hooptie Detroit car on one side of the garage and a big ol' Sawzall on the other. Put the two together and you have a Sawzall Convertible, which generally lasts for about one summer before it gets scrapped. Here's a fine example of such a car, photographed in a San Francisco Bay Area self-service junkyard. Most Sawzall Convertibles (yes, it should be called a roadster, but nobody does that) have raw, ragged metal edges, or maybe duct tape over the stumps of the amputated pillars, but someone went to the trouble to weld nice smooth metal covers over the hackage on this one. The windshield is gone. Instead, the windshield frame is ringed by tongue depressors held in place by gooey roofing tar. No, we don't know why. The Montego MX Brougham was a hot-selling personal luxury coupe in its day, selling for $3,041 in 1973. That's just under $17,000 in 2017 dollars. It must have been fun, cruising this thing on Bay Area streets with no roof and a rattle-can spray-bomb job. This one has the optional 400-cubic-inch V8 engine, rated at 171 horsepower. What would this car's original buyer have thought of its fate? This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. It's like a Marquis Brougham after you squish it in the car crusher! Featured Gallery Junked 1973 Mercury Montego MX Brougham Sawzall Convertible View 22 Photos Auto News Mercury Convertible Luxury Classics montego

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.