Xr7 on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.

Car Stories: Owning the SHO station wagon that could've been

A little over a year ago, I bought what could be the most interesting car I will ever own. It was a 1987 Mercury Sable LS station wagon. Don't worry – there's much more to this story. I've always had a soft spot for wagons, and I still remember just how revolutionary the Ford Taurus and Mercury Sable were back in the mid-1980s. As a teenager, I fell especially hard for the 220-horsepower 1989 Ford Taurus SHO – so much so that I'd go on to own a dozen over the next 20 years. And like many other quirky enthusiasts, I always wondered what a SHO station wagon would be like. That changed last year when I bought the aforementioned Sable LS wagon, festooned with the high-revving DOHC 3.0-liter V6 engine and five-speed manual transmission from a 1989 Taurus SHO. In addition, the wagon had SHO front seats, a SHO center console, and the 140-mph instrument cluster with mileage that matched the engine. When I bought it, that number was just under 60,000 – barely broken in for the overachieving Yamaha-sourced mill. The engine and transmission weren't the only upgrades. It wore dual-piston PBR brakes with the choice Eibach/Tokico suspension combo in front. The rear featured SHO disc brakes with MOOG cargo coils and Tokico shocks, resulting in a wagon that handled ridiculously well while still retaining a decent level of comfort and five-door functionality. I could attack the local switchbacks while rowing gears to a 7,000-rpm soundtrack just as easily as loading up on lumber at the hardware store. Over time I added a front tower brace to stiffen things a bit as well as a bigger, 73-mm mass airflow sensor for better breathing, and I sourced some inexpensive 2004 Taurus 16-inch five-spoke wheels, refinished in gunmetal to match the two-tone white/gunmetal finish on the car. That, along with some minor paint and body work, had me winning trophies at every car show in town. And yet, what I loved most about the car wasn't its looks or performance, but rather its history. And here's where things also get a little philosophical, because I absolutely, positively love old used cars. Don't get me wrong – new cars are great. Designers can sculpt a timeless automotive shape, and engineers can construct systems and subsystems to create an exquisite chassis with superb handling and plenty of horsepower. But it's the age and mileage that turn machines into something more than the sum of their parts.