67 Dan Gurney Cougar on 2040-cars
Greeley, Colorado, United States
67 Dan Gurney Cougar. Very well taken care of. Runs and drives just needs a few things. Carb is bad and tyranny slips a little when it's cold. It's in very good condition but obviously needs restored. Some rust in the rear wells no dents. 289 V8 that's runs strong. Everything works except for the vacuum powered headlight covers. Only 17,000 of the Dan Gurney models every made.
It has a bit of rust underneath but the only ruff spots on the car are in the rear quarters. That being said the rears will either need a bit of sheet metal work or replacement fenders. The car has No dents and is very well taken care of. The motor runs strong but the carb is shot and needs replacement. The power steering doesn't kick in on left turns and the vacuum powered headlight covers don't lift, I think there's a leak in one of the lines. Other than that everything else works. Headliner needs replaced and the dash has a sun crack. |
Mercury Cougar for Sale
Auto Services in Colorado
Windshields Express ★★★★★
Windows & Glass Plus ★★★★★
United Junk Cars ★★★★★
Toy-Auto Masters ★★★★★
Stonum Automotive ★★★★★
Spradley Barr Ford ★★★★★
Auto blog
Ford recalls over 953,000 vehicles to replace Takata airbag inflators
Fri, Jan 4 2019DETROIT — Ford is recalling more than 953,000 vehicles worldwide to replace Takata passenger airbag inflators that can explode and hurl shrapnel. The move includes over 782,000 vehicles in the U.S. and is part of the largest series of recalls in U.S. history. Included are the 2010 Ford Edge and Lincoln MKX, the 2010 and 2011 Ford Ranger, the 2010 to 2012 Ford Fusion and Lincoln MKZ, the 2010 and 2011 Mercury Milan, and the 2010 to 2014 Ford Mustang. Some of the recalls may be limited to specific geographic areas of the U.S. Takata used the chemical ammonium nitrate to create an explosion to inflate airbags. But it can deteriorate over time due to heat and humidity and explode with too much force, blowing apart a metal canister designed to contain the explosion. At least 23 people have been killed worldwide and hundreds injured by the inflators. Ford says it doesn't know of any injuries in vehicles included in this recall. Dealers will replace the inflators. Ford will notify owners about the recall starting on Feb. 18, and the company has replacement parts available for dealers to order, said spokeswoman Monique Brentley. In previous Takata recalls, parts availability had been an issue. Owners can go to this Ford website and key in their vehicle identification number to see if their cars and SUVs are being recalled. The same information will be available soon at the NHTSA recall website. More than three years after the U.S. National Highway Traffic Safety Administration took over management of recalls involving Takata inflators, one third of the recalled inflators still have not been replaced, according to an annual report from the government and a court-appointed monitor. The report says 16.7 million faulty inflators out of 50 million under recall have yet to be replaced. And 10 million more inflators are scheduled to be recalled this month, including the Ford vehicles. Safety advocates said the completion rate should be far higher given the danger associated with the inflators. The recalls forced Takata of Japan to seek bankruptcy protection and sell most of its assets to pay for the fixes. The inflators grow more dangerous as they get older because ammonium nitrate deteriorates due to high humidity and cycles from hot temperatures to cold. The most dangerous inflators are in areas of the South along the Gulf of Mexico that have high humidity. Related Video:
Junkyard Gem: 1989 Mercury Tracer Four-Door Hatchback
Sat, Mar 6 2021During the life of the Mercury brand, which began in 1939 and ended in 2011, nearly every Mercury sold in North America was a cosmetically enhanced version of some Ford model also sold here. The exceptions to this rule came when Mercury sold Fords originally designed for non-North American markets, and for which no Ford-branded version existed on our shores. The 1991-1994 Capri was such a car, as was the 1999-2002 Cougar (the Mondeo-based Cougar was unique among all Mercuries in that no other cars in the sprawling Ford Empire shared its body). The 1970-1978 Capri was sold through Mercury dealers here, but never had Mercury badging. One of the rarest of all these Mercury cars was the first-generation Tracer, a Mazda design that made its way here via Australia. The bloodline of the Tracer goes back to the Mazda 323, the ancestor of today's Mazda3 and the platform used for all those US-market Ford Escorts of the 1990s. Starting in 1991, the Tracer name went onto badge-engineered Escorts, according to Mercury tradition, but the 1988-1989 Tracers were based on the Australian-market Ford KE Laser. Underneath all of those cars (as well as the early-1990s Capris) lived Mazda 323 running gear, of course. This one nearly made it to the 175,000-mile mark during its time on the road, which is respectable by the standards of 1980s Mazdas. With an automatic transmission transferring the 84 horses from its Mazda B6 engine to the front wheels, this car wouldn't have offered a great deal of driving excitement. 1989 Tracer buyers could choose between a two-door hatchback, a four-door hatchback, and a four-door wagon. Not many Americans hurried over to their local Mercury dealers to buy Tracers, despite the fact that the nearest Ford-badged identical twins were on the other side of the globe. Mercury still seemed relevant in the late 1980s, but its days were numbered. The actress driving the Tracer in this TV commercial seems to have the same deer-in-headlights facial expression of the hapless driver-training students in the 1968 AMC Rebel commercial.
The 1965 Ford Mustang could have looked a lot different
Fri, May 8 2020The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.