1999 Mercury Cougar V6 Coupe 2-door 2.5l on 2040-cars

Auto blog

Ford recalling 450,000 Fusion, Mercury Milan sedans

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.