1964 Mercury Comet Cyclone on 2040-cars

Auto blog

Ford recalling 450,000 Fusion, Mercury Milan sedans

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.

NHTSA will investigate some Ford Fusion, Lincoln MKZ models for power steering issue

The National Highway Traffic Safety Administration is opening an investigation into the 2010-2012 Ford Fusion, Fusion Hybrid and Lincoln MKZ, the 2012 MKZ Hybrid and 2011 Mercury Milan because the agency has hundreds of complaints of electric power steering failure in these models.
According to NHTSA's data, it has received 508 complaints of the power steering allegedly suddenly malfunctioning and resulting in increased effort to turn the wheel. In four incidents, these failures resulted in loss of control and crashes. According to the reports, in some cases a power steering warning message came on as the fault occurred, and other times the system restored itself by turning off and then restarting the vehicle. NHTSA said it has also received further field report data from Ford, but that information hasn't been publicly released yet.
For the moment, there isn't a recall for this failure on these models. NHTSA is just investigating them to "assess the scope, frequency and safety consequences of the alleged defect," and the agency says an estimated 938,000 vehicles could potentially be affected.

Watch as an out-of-control car demolishes gas pump

A Baltimore area man was fighting for his life Tuesday after crashing his car into a gas station. According to WBAL, the unidentified 64-year-old lost control of his vehicle for unknown reasons around 4:55 a.m. May 1 in Parkville, Md. The 2007 Mercury Milan careened downhill, ramped over a curb, and smashed full-speed into a gas station pump. The car then flipped and came to rest against one of the station's canopy support pillars. Don Karbowniczek, owner of a service station across the street, told WBAL he was shocked there wasn't more damage. It's also surprising that the car even made it to the pumps, as it had to thread past a coin-op vacuum machine, the station's sign, a utility pole, and a traffic light pole. "It came right through, took some of our bushes out, just trimmed them for us, and how it got through and flip the way it did, I don't know. From what I see on the marks, it had to go airborne and just come down on the pump," Karbowniczek said. Thankfully there was no fire or explosion. Gas pumps have shear valves - safety devices that immediately cut the flow of gasoline when a pump is damaged. The driver was rushed to a hospital with life-threatening injuries, and was in critical condition. Police theorized the driver may have become stricken with a health issue when he lost control. Related Video: News Source: WBAL Auto News Mercury maryland gas station