2024 Mercedes-benz Sprinter 3500xd on 2040-cars

Auto blog

Buy a V8 Mercedes-Maybach, or splurge for a V12? Oh to have such problems

There's a certain air that surrounds the Maybach badge, and it's not just the scent being pumped out by the ionizer in the car's glovebox. It's the cream of the crop when it comes to German luxury. These cars are filled with an acre's worth of wood and a herd's worth of cows, ensuring your fingers rarely touch materials as pedestrian as plastic. It's as quiet, as smooth, and as imposing as you think it would be. Though the latest model from Mercedes-Maybach, the S550, might have swapped in a V8 and all-wheel drive in place of the V12 at the heart of the S600, no other amenities have been lost in translation. The car's size gives it a certain presence. Staring at the profile shows a wheelbase that spans two counties, necessitating a microphone and speaker setup simply so that the driver can converse with the passenger – and a Maybach will almost always have a passenger. No one buys a Maybach to drive. You buy a Maybach to be driven. No means of transport short of business-class airline seating offers this much space. Sit back, recline the seat, roll up the shades and enjoy your $167,125 cocoon. But you know all of that already. What you really want to know is if $25,000 - the V12-powered S600 starts at $192,225 - is worth it to gain an extra four cylinders, 74 horsepower, and 96 lb-ft of torque. On paper, no, it's not. The two cars have identical performance numbers, and the S550 benefits from Mercedes' 4Matic all-wheel-drive system. Even with all-wheel drive, the S550 weighs less than the nose-heavy S600. Fuel economy is, as expected, superior in the S550. It's rated at 16 city, 24 highway and 19 combined as opposed to 13 city, 21 highway, and 16 combined. Visually, the two cars are identical save for a few badges. The V12 badge on the S600 is replaced with a 4Matic badge on the S550, and that's where things start to get murky. When you're spending six figures on a car, decisions become more emotional than practical. $25,000 is a lot of money, but there's a bigger difference between $25,000 and $50,000 than there is between $167,000 and $192,000. As stated, you don't buy these cars to drive. Performance needs to be merely adequate. A smooth, torquey V12 is likely preferable to a hairy-chested V8, refined as it may be. These cars will never touch redline, lest the passengers spill their champagne. Plus, that V12 badge is worth its weight in country club memberships. Driving an S550 is fine until an owner shows up at an event behind an S600.

2017 Infiniti QX30 First Drive

If you've heard anything before about this car, the 2017 Infiniti QX30, it probably has to do with its corporate parents, an odd couple if there ever was one. Renault-Nissan, Infiniti's corporate overlords, inked a deal with Mercedes-Benz to share some mechanical components and platforms. That deal put a new, very modern 2.0-liter turbocharged inline-four under the hood of the Q50 and was the genesis of what you're looking at here. What are you looking at here? We drove this car in 2015, when it was called a Q30 – originally it was going to be the lower-riding counterpart to the slightly jacked-up QX30. Then Infiniti decided it'd make more sense to sell all variants of this vehicle as CUVs in the US, so we have three slightly different flavors of the QX30 instead. There's the normal version; the Sport, which is 0.6 inches lower; and the AWD, which is 1.2 inches higher. Infiniti brought us to Seattle to sample the Sport and AWD flavors on a semi-circumnavigation of the Puget Sound. It didn't rain a drop, thanks for asking, and instead was sunny and mild the whole time. It's easy to make the QX30 sound more confusing than it actually is. This is essentially a Mercedes-Benz GLA250 with full exterior styling and partial interior design by Infiniti, built in the UK alongside several other Nissans. The powertrain and chassis, including the optional AWD system, were all "co-developed" with partner Daimler, with final calibration and tuning by Infiniti engineers. Here's another way of explaining it: Infiniti needs an entry-level car to appeal to new premium car shoppers, and the QX30 is the prescription. It's a hatchback that's been given the mildest of CUV treatments and a lot of marketing descriptors. That's because hatchbacks are sales death in America. In Europe, they'll see right through the CUV posturing and realize it's just a hatchback offered in three different suspension heights. Whatever you call it to make it palatable to Americans, it's a useful little vehicle. This car is mechanically identical to the Q30, so there are some things we can gloss over. Both are powered by a transverse-mounted 2.0-liter Mercedes inline-four. It's a turbocharged, direct-injection gasoline engine, and it sure feels like one. It sounds like a rock tumbler full of nickels and runs out of breath at about 5,000 rpm. All versions make 208 hp at 5,500 rpm and 258 lb-ft of torque between 1,200 and 4,400 rpm – more than adequate but less than thrilling.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...