Slk 350.convertible. Low Reserve . on 2040-cars

Auto blog

Volvo S60 Polestar concept plays in the snow with Mercedes C63 AMG

Chris Harris took to a snowy stretch of tarmac to get a fingertips-on-the-wheel feel of the Volvo S60 Polestar concept. Harris says the turbocharged sedan with 508 horsepower and 424 pound-feet of torque - and a manual transmission - is "a study to see if Volvo can get back into the fast-car market." The Polestar S60 concept, one of which was already purchased for $300,000 by a private buyer, is still making the publicity rounds because even Volvo's Chinese owners realize that, as Harris says, "Volvo sold more cars because it made fast cars" like the old 850 T5 Wagon that stormed the British Touring Car Championship in the 1990s.
For reference, Harris compares the blue wonder to the Mercedes-Benz C63 AMG and its 487 hp and 442 lb-ft. The question is, were Volvo to get the price of a production version of the S60 Polestar to climb way down from its 200,000-pound sticker, could it be worthy competition to the established giants?
You can watch Harris divine the answer via a lot of drifting through the snow and a drag race in the video below.

Mercedes-AMG planning more hardcore A45 hot hatch

The launch of the A45 AMG marked Mercedes-Benz's first real assault on the premium hot hatch segment. And with 355 horsepower from a 2.0-liter turbo four, it is indeed hot. But the latest word has it that Mercedes-AMG is planning an even hotter version. Speaking with Auto Express at the LA Auto Show last week, AMG boss Tobias Moers indicated that his department was toying with the idea of a more hardcore version of the A45. In what Moers referred to as a "street fighter," the A45's engine would be tuned to produce even more power, the cabin stripped out and the rolling stock, brakes and aero upgraded for more serious performance. Think of it, then, as something of a Black Series approach, only it's not expected to carry that name, which has historically been reserved specifically for two-door models. Given AMG's current list of priorities and limited manpower, though, Moers suggests it will be several years – likely towards the end of the model's life cycle – before it may prepare such a model, following a similar formula to the Mini JCW GP and Renaultsport Megane R26.R. Here's hoping an American version based on the CLA could also be in the cards.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...