Roadster Convertible 3.5l Cd Traction Control Stability Control Rear Wheel Drive on 2040-cars

Auto blog

Mercedes-Benz USA confirms relocation to Atlanta

Porsche, you no longer have Atlanta to yourself. Mercedes-Benz USA has confirmed that it will be moving its corporate headquarters (shown above) from Montvale, NJ, to Georgia's most populous city. This is the second high-profile corporate relocation in the past year, as Mercedes follows in the footsteps of Toyota, which announced its relocation from California to Texas back in April (Subaru also announced a relocation, but it was just four miles away from its old offices). According to the German company, executives and their staff will relocate to an interim facility in the city's Central Perimeter until a brand-new, long-term home is completed in 2017. Around 1,000 employees will be impacted by the move, although Mercedes didn't mention if any employees would be let go as a result of the relocation. The company won't be abandoning New Jersey completely, as it will retain "several operational areas" in both Montvale and Robbinsville, NJ. As Mercedes USA CEO Steve Cannon explains, there are a number of good reasons for the company's relocation. "Atlanta is a premier city which places us closer to our ever-growing Southeast customer base, our port in Brunswick, Georgia, and to Mercedes-Benz US International, our Alabama manufacturing facility, which accounts for half of the vehicles we sell here in the US," Cannon said in a statement. "For our employees, Atlanta offers a strong quality of life, terrific schools and wonderful cultural and recreational opportunities." Mercedes-Benz USA Announces Move of Corporate Headquarters to Atlanta Several operational areas to remain in New Jersey including Parts Distribution Center and Regional Office January 06, 2015 - MONTVALE, N.J. Mercedes-Benz USA (MBUSA) today announced that it will relocate its corporate headquarters to Atlanta, Georgia, in a move designed to better serve its growing customer base and strengthen the company's position for long-term, sustainable growth. MBUSA executives and staff will relocate from its primary facility in Montvale, New Jersey, to a temporary facility in Atlanta's Central Perimeter on an interim basis. The company will construct a new, state-of-the-art headquarters expected to be completed in early 2017. MBUSA plans to begin moving employees starting in July 2015. The move, which will affect approximately 1,000 employees, will be phased to help minimize any disruption to business operations. Several operational areas will remain in both Montvale and Robbinsville, New Jersey.

Mercedes G 500 4x4 is mighty mean and bright lime green

The Mercedes-Benz G500 4x42, finally ready to meet the crowds at the Geneva Motor Show, might just be the best factory-prepped expedition off-roader on the market, should Mercedes choose to build it. The short story is that some well-heeled admirers of the G63 AMG 6x6 said, "It's nice, but can you take it down a notch?" And by "notch" they meant "an axle." So the G500 4x42 gets just two portal axles instead of three, and a slew of other features. The 4x4 squared offers up a standard G-wagen body, but instead of the 5.5-liter twin-turbo V8 from the G63, there's a new 4.0-liter twin-turbo V8 with 422 horsepower and 450 pound-feet of torque. Compared to the standard G500, the track is 11.8 inches wider, the street-cred rims being 22-inchers on 325/55 R-series tires. When it's time to get dirty, they can be swapped for an optional set of 18-inch wheels with 37-inch beadlock tires. With that setup and the same wheelbase as the G500 LWB, ground clearance and fording depth are more than doubled to 17.7 inches and 39 inches respectively, the angle of approach goes from 36 degrees to 52 degrees and the angle of departure leaps from 27 degrees to 54 degrees. Breakover angle is bumped from 21 degrees to 47 degrees, a two-piece stainless steel undertray protecting the sensitive bits when you push it. The only parts that get a raised eyebrow are the carbon fiber wheel arches and bumpers, which might behave badly when they meet an immovable granite object. To escape the sensation of driving the Taj Mahal in urban environments, there's a twin spring-and-damper setup at each wheel. One of the spring-damper combos is electronically controlled and adjustable, and when called into action via the Comfort or Sport mode, takes control of wheel action; even when passive, it will kick in to automatically to stiffen the body if it detects evasive maneuvers. On top of all that, to remind you that you're in a Mercedes the interior is fitted out with Designo leather trim and diamond-quilted microfiber. Mercedes is going to gauge its Geneva reception before deciding to build it, a hurdle we're sure will be overcome. Car and Driver drove it and verified it's the real deal, with pricing - if it's built - speculated to land between the G63 AMG and G65 AMG. The press release below has all the details. Related Video: Near-series show car G 500 4x42: The G-Class Squared Stuttgart, Feb 21, 2015 -- Only a G-Class can be better than a G-Class.

Mercedes was set to sell version of Nissan Titan, now Infiniti might instead

Mercedes-Benz Titan. Mercedes-Benz Frontier. Mercedes-Benz pickup truck. None of these things roll off the tongue particularly well. We'd like to think that's the reason Daimler opted to kill the idea of rebadged Titan and Frontier pickups from corporate ally Nissan. In reality, the execution before the Frankfurt Motor Show was due to more complicated issues.
Yes, Mercedes, byword for German luxury, style and quality, would have slapped a three-pointed star on a pair of Japanese pickup trucks that have failed to resonate with consumers in the world's largest truck market. That slapping of badges isn't much of an exaggeration, at least on the outside. According to the report from Road & Track, the truck's front clip would have been tweaked, but beyond that, the sheetmetal would have been unchanged. The interior would have received a more thorough going-over by the team at Mercedes, while the suspension and noise, vibration and harshness tuning would have also received significant attention.
The trucks would have ended up being sold through the light-commercial branch of Mercedes-Benz - the same folks that will happily sell you a Sprinter van - had the deal gone through. Issues arose, though, first with the engines. Mercedes wanted a wider range of powertrains to allow it to tune models for specific markets, while Nissan said it couldn't engineer the wide variety of engines that MB wanted to drop under the hood. For the smaller truck, meanwhile, MB was interested in a hybrid or plug-in variant, according to R&T, although this was also shot down by Nissan.