2008 Mercedes-benz Slk280, Clean Carfax, Premium 1, Well Maintained, Beautiful! on 2040-cars

Auto blog

Mercedes releases 6x6 G63 AMG specs and pics [w/video]

Mercedes-Benz has finally dropped full details on its insane G63 AMG 6x6. The machine puts 544 horsepower to all six wheels thanks to a twin-turbocharged 5.5-liter V8. A seven-speed gearbox shuttles power to the ground via three sets of portal axles, which helps give this machine a full 15.75 inches of ground clearance. By comparison, the standard G63 AMG sits with just 8.27 inches of ground clearance. The extra lift allows this 6x6 to ford nearly 40 inches of water and run massive 37-inch tires. All told, there are five differential locks on this thing, all controlled by a special "locking logic" that provides the best traction possible for any given situation.
The controls offer up three stages of locking, which we can only assume range from JKLOL to OMGWTF. Right now, AMG says this monstrosity is only a show vehicle, but we imagine it wouldn't take much to convince the team to whip up one of your very own. Check out our full gallery and the press release below for all the nitty gritty. While you're down there, you can also check out the video on the machine one more time.

Mercedes-Benz C-Class scores well in TUV lifecycle analysis

Mercedes-Benz drivers and treehuggers don't always go hand in hand, but, like a lot of other companies, the German automaker is looking to boost its green cred. This time, it's all about the car's lifecycle carbon footprint. The Daimler AG unit is using its new C-Class sedan as an example of how it's making progress in that department. Mercedes-Benz, citing the inspection authority TUV Sud, says the 2015 C-Class has a 10-percent lower lifecycle carbon footprint than its 2014 predecessor, based on driving about 125,000 miles over the life of the car. About 95 percent of the car (by weight) is recyclable, slightly higher than the average for most vehicles, and the model has upped its amount of recyclable materials up by 23 percent and increased its use of "natural materials" by 55 percent. Better aerodynamics also helps things out on the fuel-economy front, Benz says. Taking a longer view, the 2015 C-Class's carbon footprint is 28 percent better than the 2007 version that launched the vehicle line. The 2015 C-Class hasn't received a fuel-economy rating from the US Environmental Protection Agency, which tagged the 2014 C350 with a combined fuel-efficiency rating of 24 miles per gallon from its 3.5-liter 6-cylinder engine. Check out Mercedes-Benz's press release below and find the Autoblog First Drive impressions here. TUV Environmental Certificate: The new C-Class makes its mark with an exemplary life cycle assessment Stuttgart, Mar 28, 2014 The C-Class sets efficiency benchmarks for its class, helped by an intelligent lightweight concept, excellent aerodynamics and new, frugal engines. The neutral inspectors from the TUV Sud technical inspection authority have confirmed the high level of environmental compatibility of the new Mercedes-Benz C-Class. Besides a sensuous, clean-cut design, a top-class interior and a host of technical innovations, the premium saloon also boasts an exemplary life cycle assessment, which is why it has been awarded the Environmental Certificate in accordance with the ISO 14062 standard. Professor Dr. Herbert Kohler, Chief Environmental Officer at Daimler AG: "Our engineers have pulled out all the stops in an effort to lower fuel consumption while at the same time further accentuating the car's sporty character. By employing an intelligent lightweight design with a high proportion of aluminium, for example, it has been possible to make the new C-Class up to 100 kilograms lighter than its predecessor.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...