560sl, Low Mileage, Unbelievable Condition, Runs Perfectly, Gorgeous Inside&out! on 2040-cars

Auto blog

Mercedes-Benz GLA45 AMG spied in Sweden

We've spotted the all-new Mercedes-Benz GLA testing a couple times in recent months in getting closer to production form and shedding camouflage, but now it looks like we're see our first look at the AMG version of this compact crossover. The low ride height might trick some into thinking that we're just seeing the already-confirmed A45 AMG out testing, but the unique beltline, rear doors and side windows confirm this is some version of the GLA-Class.
What makes us so confident that this is the AMG model? Well, for starters, this prototype has beefier brakes with cross-drilled front and rear rotors and bigger front calipers, but it also sports dual exhaust outlets poking through the rear fascia and a suspension that has been lowered considerably. Our spy shooters said that this car's exhaust note made it almost certainly an AMG model.
Just to be clear, the GLA AMG will not be powered by a 4.5-liter engine. The closely related A45 AMG will carry the "45" in its name to celebrate the first 45 years of AMG, and our sources seem to indicate the AMG version of the GLA will do the same. We're expecting this sporty crossover to produce as much as 350 horsepower from its AMG-tuned four-cylinder engine, and like the all-new E63 AMG, it could very well come standard with 4Matic all-wheel drive.

Mercedes fits new C-Class with AMG kit

It's only been a week and a half since Mercedes-Benz revealed the new C-Class, and it'll likely be a while yet before the replacement for the C63 AMG comes along. But if you want to see a preview of what it'll look like, look no further than the AMG aero kit that has just surfaced.
Expected to debut on the new C-Class at the fast-approaching Detroit Auto Show, the AMG Line Exterior Pack adds a new bumpers front and rear, side skirts, dual exhaust tips, mesh grille, aluminum window frames and - most importantly - 18-inch alloys packing upgraded brakes and fitted to a lowered sport suspension. All of which will help any C-Class look the part, even if the engine remains stock.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...