2003 Sl55 Amg All The Power Of Amg, Great Miles!! on 2040-cars

Auto blog

The Vision Mercedes-Maybach 6 is pure electric excess

The Vision Mercedes-Maybach 6 is a two-door, two-passenger coupe that spans over 18 feet long. Everything about this car is more than you need. But isn't that the true definition of ultimate luxury? With so much sheet metal, it can be tricky to get everything to look right, but Mercedes seems to have done nicely with this concept. Overall, the car's long nose and short deck are reminiscent of the Mercedes-AMG GT, and the long, tapering tail and lights are similar to that of the Mercedes-AMG Vision Gran Turismo concept from a few years ago. Capping off the front of the Mercedes-Maybach 6 is a proud, prominent grille that the company claims was inspired by a pinstripe suit. At each corner are 24-inch wheels with transparent panels based on the transforming, aerodynamic wheels of the Concept IAA Mercedes previously showed. Powering this massive coupe are four electric motors that can produce a combined 738 horsepower. Mercedes says that will be enough to get the car to 62 mph from a standstill in under 4 seconds. The motors are backed by an 80 kWh battery that the company says can propel the car up to 200 miles. Perhaps more interesting than its range is the fact that the Mercedes-Maybach 6 can pick up a charge worth 62 miles in just 5 minutes, assuming you've got the right charger. This is technology that could really make a difference in the day-to-day practicality of electric cars, provided that it makes it to reality. The car can be charged either by being plugged in, or wirelessly with an inductive charging system. Inside, the Vision Mercedes-Maybach 6 has even more fantastical features. It does retain analog gauges as a link to the past, but augments them with wrap-around glass trim that doubles as a display and touch-sensitive interface. The windshield seems to be pulled from Mission Impossible with its ability to display information. Sensors in the seats are designed to read the condition of the passengers and even their outfits to custom tailor everything from lighting to massage features. It's hard to say what the production odds are for this mega Mercedes, but you probably shouldn't hold your breath. Even for the rarified segment of seven-figure cars, this would be pretty extravagant. It wouldn't be impossible, or without precedent. Back when Maybach was still its own brand, the company created a ridiculous luxury coupe called the Exelero, and they sold the fully-functional car.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Mercedes-Benz releases US-spec 2014 Sprinter details

Last week, Mercedes-Benz released the details for the updated 2013 Sprinter intended for global markets, but this week it has announced what changes are being made to the US-spec version of the van for the 2014 model year, including the Freightliner model. As expected, most of the changes made to the European model will be present on the 2014 Mercedes-Benz Sprinter when it goes on sale in the US, which is expected to be this fall.
The biggest difference between the Sprinter announced last week and the one headed to our shores is what is found under the hood. While European Sprinters will come with diesel engines and offer the availability of a supercharged four-cylinder gasoline or CNG engine, US Sprinters will still offer the 3.0-liter V6 BlueTEC diesel. This year's Sprinter now comes standard with a new base engine, the 2.1-liter four-cylinder BlueTEC diesel. This smaller engine will produce 161 horsepower and 265 pound-feet of torque, and will be paired to a seven-speed automatic transmission; the optional 3.0 V6 puts out 188 hp and 325 lb-ft of torque, and will be mated to a six-speed auto.
Fuel economy for the new Sprinter has not been announced, but Mercedes-Benz has made numerous changes with the goal of improving efficiency. To this end you'll find a new, low-friction rear axle and the optimization for the generator, fuel pump and power steering pump.