1977 Mercedes 450sl Convertible *outstanding Condition* on 2040-cars

Auto blog

Mercedes-Maybach SL 680 Monogram Series gives the rich and famous what they want

TOPANGA, Calif. – Give the people what they want, right? Especially if they're extremely wealthy. And possibly famous.  Apparently, the requests for a convertible Maybach from existing owners and/or celebrities were so frequent and insistent that the uber-luxury offshoot of Mercedes-Benz finally decided to give them just that. The 2025 Mercedes-Maybach SL 680 Monogram Series answers the call. While all other Maybachs are based on a Mercedes-Benz, this is the first Maybach to be based on a car developed by AMG: the current-generation SL 55 and SL 63. This presented a greater challenge to engineers than past efforts. Although a sportier Maybach was intended (as opposed to modern Maybach's first drop-top effort, the Maybach S 650 Cabriolet), the SL 680 is, not surprisingly, seeking a much different dynamic end goal than its AMG-only cousins. According to Maybach product manager Hannes Meyer, the far shorter wheelbase than the Maybach norm was a particular challenge in making sure that its convertible offering maintained "the same ease and nearly floating driving experience" expected of the brand. To that end, the Maybach SL shares the SL 63's air suspension and trick AMG Active Control interconnected hydraulically controlled dampers, but the tuning is changed, especially with the rear air springs as the driver sits closer to those. Meyer says the damper valves in particular have a greater range between sportiness and comfort than the SL 63. The steering system is totally Maybach-specific, including a different ratio and more upright front camber, resulting in what Meyer described as a more stable and less aggressive setup than what you'd find in the SL 63.  Before you start looking for a 6.8-liter engine in the Mercedes arsenal, remember that those numbers don't really mean anything anymore. The Maybach SL 680 has exactly the same 4.0-liter twin-turbo V8 as the SL 63 good for 577 horsepower and 590 pound-feet of torque. The nine-speed AMG transmission is the same in terms of hardware, but it has totally different software. In particular, the 2-3 and 3-4 shifts are most different in order to provide a smoother, more Maybach acceleration experience. The 4Matic+ all-wheel-drive system is also shared, but is programmed to have a more balanced front-to-rear power split than the rear-biased AMG. Finally, the exhaust has been retuned. Meyer said that up to 2,800 rpm, the exhaust isn't quieter than what you'd experience in the AMGs, it just has a different tone.

Mercedes-Benz S500 Plug-in Hybrid ready for 'major role' in urban areas

We finally got a clear look at the Mercedes-Benz S500 Plug-in Hybrid at the Frankfurt Motor Show last fall, but it took until this week to learn what the vision (see what we did there) is that Mercedes-Benz has for the PHEV. Despite it's generous size, Mercedes thinks this is a vehicle that will work well in urban areas. Speaking to members of the media during the Detroit Auto Show, Thomas Weber, Daimler AG management board member and research and development chief for Mercedes-Benz cars, said that the S500 PHEV, "will play a major role in congested areas" and that it will offer "a lot of driving pleasure." Part of that pleasure will come from a 0-62 mile-per-hour time of around 5.5 seconds thanks to a turbocharged, 3.0-liter V6 and an 80-kilowatt electric motor. The PHEV also has a 19-mile EV range, which will put it at the bottom end of the Three-Pointed star plug-in lineup. The upcoming C-Class plug-in, for example, will likely go, "closer to 50 km [31 miles]," Weber said, according to Green Car Reports. The S500 PHEV will go on sale in Europe later this year and will come to the US in early 2015 but there is no timeline, yet, for the C-Class plug-in (and the standard gas-electric hybrid version) or the even-more-future E-Class hybrids. Featured Gallery 2014 Mercedes-Benz S500 Plug-in Hybrid: Frankfurt 2013 View 22 Photos News Source: Green Car ReportsImage Credit: 2014 Jonathon Ramsey / AOL Green Detroit Auto Show Mercedes-Benz Electric Hybrid PHEV s500

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...