Excellent Clk 500 Navigation Heated And Cooled Front Seats Electric Rear Shade on 2040-cars

Auto blog

Watch Schumacher's hot lap of N"urburgring in Mercedes F1 car

In advance of the Nürburgring 24-hour race last weekend, Mercedes-Benz put on a demonstration that had Michael Schumacher playing catch-up in a Formula One car against four examples of AMG metal. There were four cars sent off in staggered starts before Schumacher: an A45 AMG, E63 AMG 4Matic, SLS AMG Black Series, and an SLS AMG GT3 car. "Mr. Formula One," as the German television commentators call him, left three minutes after the SLS AMG GT3.
There are two videos of Schumacher's lap, the first is on-board footage - and even though there were several GoPros on the car the POV never cuts away from the front wing. You can hear the throttle and tell he's not pushing it, you can also tell how bumpy the track is. The second video is footage from the German Sport1 channel - with commentary in German - that shows all the cars taking off and takes the aerial view of proceedings. He looks to be going a lot faster in that one. You can compare and contrast yourself with the videos below.
Oh, and it's worth noting that, even with the likely restricted car, and the made-for-TV environment, Schumi turned in a quick lap. The nose camera shows the F1 car start to slow down on the back straight, near the start/finish line, right around the modern-length track record time of six minutes and eleven seconds.

VW looking to MAN up, ditch Mercedes van deal

Unlike the US, the commercial truck market throughout the rest of the world is chocked full of competitors from many different automakers. Since 2006, Volkswagen has had a fullsize van called the Crafter that was a result of a partnership with Daimler AG and based on the Mercedes-Benz Sprinter. This partnership is supposed to last through 2016, but Reuters is reporting that VW might be looking to end its relationship with Daimler and create its own van in cooperation with German truck and bus maker MAN.
The article says that VW AG has more than a 75-percent stake in MAN, which would essentially be keeping the new commercial vehicle in-house. Even if VW bolts, Daimler still has a deal worked out in the commercial truck industry between its subsidiary Mitsubishi Fuso and Renault-Nissan to supply the other with different trucks.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...