2006 Mercedes-benz Clk350 Base Coupe 2-door 3.5l on 2040-cars

Auto blog

AMG-powered Aston Martins still years away

After flirting for several years, Mercedes-Benz and Aston Martin have finally tied the knot. Just don't expect to see any offspring to result from the union for at least three or four years.
This according to Auto Express, which spoke with Daimler chief Dr. Dieter Zetsche at the Frankfurt Motor Show last week. AE reports that a new range of AMG-developed turbocharged V8s, transmissions and electrical components will make their way into the successors to the current V8 Vantage and DB9, but that these models are still a few years off.
Purists might balk at the thought of a Mercedes-powered Aston holding true to the brand's heritage. But while David Brown (for whom the DB range is named) may have steered clear of shoehorning in Detroit muscle into his cars, the entirety of the company's current range is powered by engines borrowing technology from Ford, and that arrangement seems to have worked well for Aston until now. And if you're still skeptical, look no further than Pagani and its AMG-sourced engines and you should have all the proof you need that the new relationship between Daimler and Aston could be a success.

Recharge Wrap-up: liquid-cooled Tesla Supercharger, Acenta+ Leaf

A new video offers a close look at Tesla's updated Supercharger. Recently, Elon Musk spoke about the new charging station with a thinner, suppler liquid-cooled cable that is not only easier to manage, but has the potential to handle larger loads and offer quicker recharging. The first examples have been installed in Mountain View, CA, which we can see in this video. Besides the new cable, the new Supercharger also features a solid "button" on the charging handle as well as vents around the bottom of the unit. The video even shows thermal imaging of the new Supercharger, which shows the cable to be cooler than the cameraman usually records. See for yourself in the video above, and read more at Treehugger. Nissan has added a new trim level to the Leaf in the UK. The Acenta+ slots above the Acenta and just below the range-topping Tekna. It comes standard with the 6.6-kW onboard charger and Mode-3 32-amp (EVSE) cable. Using a fast charger, the Acenta+ Leaf can charge to 100 percent in just four hours. "We're delighted to add a new member to the Leaf family in the UK," says Nissan Motor GB Managing Director James Wright. "More than 9,500 Leafs have already been sold here and Nissan is the undisputed leader in the EV market. This new model delivers exceptional value and showcases the Leaf's incredible technology and engineering." Read more at Next Green Car. Mercedes-Benz Malaysia says its vehicles are compatible with B10 biodiesel blend. Malaysia recently announced a mandate for diesel to be sold blended with 10 percent palm-oil based biodiesel, after which, carmakers like BMW and Mercedes-Benz came forward with concerns over compatibility with their vehicles. "We have evaluated carefully the influence of B10 Biodiesel blends on our current diesel vehicles for the Malaysian market and we are now able to confirm its compatibility," says Mercedes-Benz Malaysia President and CEO Roland Folger. "We have service intervals of 12,000 km to ensure that our customers are not affected by the diesel quality. Our diesel-powered vehicles currently sold in Malaysia were seen to have run both smoothly and safely with the use of the B10 biodiesel blend." Read more from Paul Tan's Automotive News. Renault has honored its leading electric vehicle dealers with the 2015 Renault EV Awards.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...