Mercedes Benz C250 4matic Sedan on 2040-cars

Auto blog

Automakers' sound systems: Crank it, don't yank it

Years ago, one of the first things most music lovers did after buying a new vehicle was drive to an aftermarket stereo shop to get the crappy stock components swapped for better gear. And you'd typically get not only better sound but also more bang (and boom) for your buck. But in the past decade or so, the overall quality of OEM audio has dramatically increased, while car electronics became more complex, removing the incentive for most new vehicle owners — and all but the most hardcore DIYer — to start from scratch. In 2010, I did a comparison of the average costs for OEM electronics vs. similar offerings from the aftermarket, and back then automakers' stock premium systems were by far the best bargain — and are probably an even better value now. The premium 14-speaker, 1,200-watt JBL system in the all-new 2019 Toyota Avalon is a prime example of this trend. It's standard on the top two Limited and Touring trims and is available as a $680 audio upgrade on the XLE and XSE. I doubt you can even buy 14 speakers and 1,200 watts of amplification from the aftermarket for 700 bucks, much less have it all installed. And because the system is bundled with Toyota's Entune infotainment system, Apple CarPlay and a surround-view camera, removing the head unit means you would likely lose these features. Another advantage of OEMs and their audio partners is they can design the car around the audio system. In the past, automakers would typically place speakers where convenient for packaging, not for optimal sound reproduction, and audio engineers were forced to compromise. But as with the Avalon's premium JBL audio system, this is starting to change. At a recent behind-the-scenes peek for media into the process of developing the system, Toyota and Harman engineers delved into the minutia of sealing the inner panel of the front doors to create an enclosure for 6x8-inch woofers, making space in the pillars for JBL horn tweeters and extensively measuring the acoustic properties of the interior to tune the sound to the space. I'm met some creative and skilled car stereo installers, but none with a degree in psychoacoustics. The system is also the first to feature Quantum Logic Surround that creates a multi-channel listening experience from two-channel sources. And it includes Harman's Clari-Fi processing that "rebuilds key details lost" in compressed audio formats used by streaming music services and MP3s.

Leno shows off his current project cars

When your car collection grows to the enormous size of Jay Leno's, adding the usual muscle cars or European exotics loses the allure. It becomes necessary to start taking the things in weird directions. Leno is proving just that with his latest tour of many of the ongoing projects currently happening in the garage. With everything from Harley-Davidson generators to '50s hot rods on display just in this short video, there's something any fan can love. The place is like an automotive wonderland. For most people any one of these projects would be an absolute dream. For example, Leno has a copy of a one-off Mercedes-Benz racecar transporter that is nearly ready to drive. Another project hasn't even started yet but already seriously piqued our interest. Leno obtained a very ratty 1966 Volvo 122S wagon, but rather than just a restoration he's has a plan to get a V8 with a flat-plane crank from Volvo performance specialists Polestar. Another project on the way should provide a significant upgrade in performance, while still being quite green. Leno's team has already rebuilt the frame and wooden body from a 1914 Detroit Electric, and with that work done they've started dreaming of a modern drivetrain for it. One proposed candidate for the swap has been to install motor from a Nissan Leaf and a bank of lithium-ion batteries. News Source: Jay Leno's Garage via YouTube Aftermarket Celebrities Mercedes-Benz Volvo Electric Performance Classics Videos Jay Lenos Garage detroit electric

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...