2008 Mercedes C350!! Nav Sport-pkg Amg-whls Heated-sts Hk-sound/i-pod 1-owner!! on 2040-cars

Auto blog

2016 Italian Grand Prix race recap

The Italian Grand Prix at Monza is called the Temple of Power. Furthermore, the winning driver in Italy started on pole in 13 of the last 16 years, and only one driver in that time has won the Italian GP from behind the front row of the grid: Rubens Barrichello in 2002 and 2009. By this point in the current Formula 1 season (era?) we know what it means when a track emphasizes both power and pole position: Mercedes-AMG Petronas. The Silver Arrows locked out the front row with Lewis Hamilton on pole. A poor start prevented the Briton from capitalizing on the advantage, so teammate Nico Rosberg and four other drivers swept by him before the end of the second turn. Mercedes would later say a clutch issue caused Hamilton's botched start, but that didn't help the man who'd just fallen to sixth place. Rosberg got about two laps of television coverage on his way to an unbothered victory ahead of Hamilton. Ferrari made Hamilton's second-place finish easier by sticking to a two-stop strategy; both Mercedes drivers pitted once. We aren't sure why Ferrari didn't at least attempt a one-stopper once Sebastian Vettel and Kimi Raikkonen had been gifted second and third on track. A pit stop took about 23 seconds from entry to exit and Vettel finished third, six seconds behind Hamilton. Raikkonen finished fourth, another seven seconds behind Vettel. Perhaps the Scuderia's tire usage wouldn't allow longer stints, but we'll never know. Daniel Ricciardo wielded his Red Bull like a scalpel to make an impeccable pass on Valtteri Bottas in the Williams and take fifth place. Ricciardo, trailing another Italian province behind, somehow closed the gap on Bottas in just the braking zone of Turn 1, pulling alongside near the apex without locking a wheel on entry nor running wide on exit. Bottas claimed sixth ahead of Red Bull's Max Verstappen, Sergio Perez in the Force India, Felipe Massa in the second Williams, and Nico Hulkenberg in the second Force India sealing the top ten. Monza did spring a few on-track surprises. Esteban Gutierrez drove Haas F1 into Q3 for the first time this season, the Mexican setting the sixth-best time in Q2. Manor Racing planned for Monza all season, Pascal Wehrlein repaying the effort by qualifying 13th. Fernando Alonso pitted his McLaren on Lap 50 of the 53-lap race for a set of super soft Pirellis, then set the fastest lap. It's Honda's first fastest lap since 1992. The biggest moments happened off the track.

Aston wants to build DBX on its new platform, not Mercedes'

Aston Martin is proceeding with plans to launch the DBX as its first production crossover. It just can't say at this point what it will be based on. Speaking with Automotive News Europe, Aston's new CEO Andy Palmer indicated that basing the DBX on a Mercedes SUV platform would not be its first choice because they "clearly sit in a very different space to the one we want to go" with the DBX. Instead, the company's first choice would be to build the crossover atop the new platform it's developing for its sports cars. "It just depends how high off the ground it could go," said Palmer. "I don't exclude the possibility of using some [Mercedes] parts, but I would say very much the primary route is our platform." The prospect of building an Aston SUV on Mercedes architecture – namely that of the GL-Class – has been on the table for some time now. The Lagonda SUV concept it showcased at the Geneva show in 2009 was based on the GL, and the two automakers have been forging a tightening alliance in the years since. The British automaker's next-generation engine is to be built by Mercedes-AMG, and it is expected to source other components from the German automaker as well. For its part, Mercedes has been taking a sportier approach with its latest crossovers, as demonstrated by the GLE Coupe that debuted before the more conventional version and the Concept GLC Coupe that previewed the GLK's replacement in Shanghai last month. Aston Martin, on the other hand, is building a new sports car platform that will underpin its next generation of luxury GTs, replacing the long-serving VH architecture that has served for decades as the basis for its entire model line. Perhaps the most surprising of ANE's report, though, is that Aston seems to be proceeding with plans to build the DBX apparently without even knowing what platform it will use.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...