Mercedes 1984 500sel Euro 69,000 Miles on 2040-cars

Auto blog

Mercedes G 500 4x4 is mighty mean and bright lime green

The Mercedes-Benz G500 4x42, finally ready to meet the crowds at the Geneva Motor Show, might just be the best factory-prepped expedition off-roader on the market, should Mercedes choose to build it. The short story is that some well-heeled admirers of the G63 AMG 6x6 said, "It's nice, but can you take it down a notch?" And by "notch" they meant "an axle." So the G500 4x42 gets just two portal axles instead of three, and a slew of other features. The 4x4 squared offers up a standard G-wagen body, but instead of the 5.5-liter twin-turbo V8 from the G63, there's a new 4.0-liter twin-turbo V8 with 422 horsepower and 450 pound-feet of torque. Compared to the standard G500, the track is 11.8 inches wider, the street-cred rims being 22-inchers on 325/55 R-series tires. When it's time to get dirty, they can be swapped for an optional set of 18-inch wheels with 37-inch beadlock tires. With that setup and the same wheelbase as the G500 LWB, ground clearance and fording depth are more than doubled to 17.7 inches and 39 inches respectively, the angle of approach goes from 36 degrees to 52 degrees and the angle of departure leaps from 27 degrees to 54 degrees. Breakover angle is bumped from 21 degrees to 47 degrees, a two-piece stainless steel undertray protecting the sensitive bits when you push it. The only parts that get a raised eyebrow are the carbon fiber wheel arches and bumpers, which might behave badly when they meet an immovable granite object. To escape the sensation of driving the Taj Mahal in urban environments, there's a twin spring-and-damper setup at each wheel. One of the spring-damper combos is electronically controlled and adjustable, and when called into action via the Comfort or Sport mode, takes control of wheel action; even when passive, it will kick in to automatically to stiffen the body if it detects evasive maneuvers. On top of all that, to remind you that you're in a Mercedes the interior is fitted out with Designo leather trim and diamond-quilted microfiber. Mercedes is going to gauge its Geneva reception before deciding to build it, a hurdle we're sure will be overcome. Car and Driver drove it and verified it's the real deal, with pricing - if it's built - speculated to land between the G63 AMG and G65 AMG. The press release below has all the details. Related Video: Near-series show car G 500 4x42: The G-Class Squared Stuttgart, Feb 21, 2015 -- Only a G-Class can be better than a G-Class.

Weekly Recap: Autonomous driving goes commercial in Nevada

Nevada granted Daimler Trucks North America the first license to run an autonomous commercial vehicle on public roads in the United States Tuesday, marking another milestone in the technology's rapid advancement. Gov. Brian Sandoval and Daimler truck chief Wolfgang Bernhard promptly used the license to lap Highway 15 near Las Vegas in a newly revealed Freightliner Inspiration Truck. It was a clear signal that autonomous driving is big-rig reality, though it's still a long way from widespread use. Nevada certified two of Daimler's Freightliner Inspiration Trucks, which use the company's Highway Pilot system with a stereo camera, radar, and lane-keeping collision-prevention features to regulate the brakes and steering. The radar component has a long-range sensor that can cover 820 feet at an 18-degree angle and a shorter-range unit that stretches 230 feet at a 130-degree angle. The Inspiration trucks are based on the existing Freightliner Cascadia Evolution model used on US roads. In addition to the autonomous technologies, it also has futuristic design cues, including blue lighting in the front and a new hood and grille. While there are only two Freightliner Inspiration trucks in existence, Daimler expects to bring the Highway Pilot system into mass-produced big rigs by 2025, in time to capitalize on the market's predicted growth. The German truckmaker predicts the global hauling market will triple by 2050, and the United States will be a key part of that growth. Trucks carry 69.1 percent the nation's domestic freight tonnage and hauled 9.7 billion tons of freight in 2013, according to the American Trucking Association. Daimler expects autonomous driving to augment this growth, and perhaps evolve the role of the truck driver. Still, the company points out autonomous tech is not meant to replace drivers, but to assist them and relieve fatigue and monotony on long hauls. The driver has to stay in control for passing, in city traffic, and when hooking up the trailer. The company said autonomous driving also offers the potential for improved fuel economy – tests showed a five-percent gain – and lower maintenance costs. Daimler also said the technology could reduce congestion on the road. Much of this is attributable to the constant flow of traffic, which is aided by autonomous driving. While the benefits are becoming increasingly apparent, autonomous technology is still met with skepticism.

Mercedes investing $500 million for new Sprinter plant in SC

The commercial van segment is exploding in popularity in the US right now with a vast array of recent products from multiple marques, and there's even more on the way from automakers like Hyundai. Mercedes-Benz is trying to grab a bigger share of the expanding market, too, and is launching its smaller Metris here in the fall. Now comes word that Mercedes will construct a $500-million factory in Charleston, SC, that will build the next-gen Sprinter domestically. According to Mercedes, construction of the new plant will begin in 2016, and when complete, the site will cover around 200 acres, including a body shop, paint shop and assembly line. It will also employ 1,300 people who will be building Sprinters badged as both Mercedes and Freightliner models. Rumors about this new construction go back to late last year. Mercedes currently has to ship some partially disassembled Sprinters into the US from Germany, paying import duties on them, and then the company puts the vans back together at a site in Ladson, SC. The process obviously adds costs to the models, and the domestic factory should mean a more price-competitive vehicle. Plus, a local factory means quicker deliveries to dealers. Despite the laborious import process, the Sprinter is a hit in the US. Mercedes sold 25,745 of them in 2014, which made the country the van's second-largest market behind Germany. They were first launched here in 2001 and since then have gained a nine-percent market share in the segment, according to the company. Mercedes is on a construction boom at the moment. The company is building a new corporate headquarters for the US in Atlanta, GA, due to be complete in 2018. The German brand is also investing $2.4 billion to expand its Tuscaloosa, AL, factory to build models like the forthcoming GLE-Class. MERCEDES-BENZ VANS TO INVEST AROUND $500 MILLION IN NEW VAN PLANT IN SOUTH CAROLINA, U.S. 09/03/15 from Mercedes-Benz New plant to be built in Charleston, South Carolina, beginning in 2016 Next generation Sprinter also to be manufactured in the U.S. Expansion of the global production network as part of the "Mercedes-Benz Vans goes global" growth strategy Creation of more than 1,300 new jobs planned Volker Mornhinweg: "We are investing around half a billion dollars to create a top-notch Mercedes-Benz van plant here in South Carolina.