76 450 Se Mercedes 40k Miles Starts And Drives. on 2040-cars

Auto blog

Mercedes Concept GLA45 AMG is ready to run

This is the Mercedes-Benz Concept GLA45 AMG, and what we mean by that is, "This is the Mercedes-Benz GLA45 AMG." Mercedes has just unveiled the liveried 'concept' at the 2013 Los Angeles Auto Show, giving potential customers a very good look at the newest lunatic in the AMG asylum - a 355-horsepower, 332-pound-foot crossover that uses the same 2.0-liter, turbocharged four-cylinder engine found in the CLA45 AMG and Europe's A45 AMG.
Joined with a seven-speed, AMG Speedshift dual-clutch transmission and an AMG Performance 4Matic all-wheel-drive system, Mercedes promises a sub-five-second run to 60 miles per hour. That's not just quick for a crossover, that's quick full stop.
That sleek, lifted body has also been tweaked by the minds at AMG's Affalterbach facility. A new rear spoiler, side sills and front clip are the primary aerodynamic tweaks. Aesthetically, AMG has fitted the requisite "Turbo" badges, gloss-black accents (including exhaust tips and roof rails) and a set of 21-inch, AMG-spec alloy wheels to round out the overall package. Based on the spy shots we've seen, expect slightly toned down aerodynamics when the GLA45 AMG arrives in showrooms.

Mercedes-Benz CLA stars in sweeping short with supermodel Karlie Kloss

The Mercedes-Benz CLA earned itself a spot on our list of the top five unveils of the 2013 Detroit Auto Show, and for good reason. The German luxury compact is the first small car from the Silver Arrow that looks suitably premium inside and out. Nowness.com has turned out a new video of the CLA featuring super model Karlie Koss in the lead role. We aren't entirely sure what the premise is, but from what we can tell, it looks as if the CLA comes to life and proceeds to be a giant jerk.
After Koss stops to take a closer look at a white horse, the CLA gives the supermodel the old stop-and-go treatment before leaving her on the side of the road. Eventually, the sedan makes nice, but Koss has to ride shotgun instead of taking the controls herself. You can check out the video below to see for yourself.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...