Mercedes 190 Sl 1958, Good Car To Restore on 2040-cars

Auto blog

Brabus to storm Geneva with 800-hp version of Mercedes SL65 AMG

At no point during our recent drive of the 2013 Mercedes-Benz SL65 AMG did we ever think, "You know, this thing sure is slow." After all, Merc's range-topping SL comes fitted with a twin-turbocharged 6.0-liter V12 capable of sending 621 horsepower and 738 pound-feet of torque to the rear wheels. But just in case you're still all "meh" about what the SL65 throws down, Brabus will gladly come to your rescue with this, the 800 Roadster.
As its name suggests, the 800 Roadster ups the V12's power figures to 800 horsepower and - wait for it - 1,047 pound-feet of torque. Don't get too excited, though - that torque number has been electronically limited to a measly 811 lb-ft since, you know, the transmission would probably explode if you tried to put the full force through it. Nevertheless, these represent increases of 79 hp and 73 lb-ft over the standard SL65, and that means the 800 Roadster can shoot to 62 miles per hour in just 3.7 seconds - two-tenths of a second quicker than the Merc its based on. More impressively, hitting 124 mph takes just under 10 seconds, and the droptop will finally top out at an electronically limited - limited! - 217 mph. Holy smokes.
To manage all of that speed, Brabus has engineered a special carbon fiber aero kit that reduces lift, and a unique control module for the SL65's active body control suspension lowers the ride height by one full inch. The 800 Roadster rides on new 20-inch wheels, and a unique limited-slip rear differential was added, featuring a 40 percent locking rate that further enhances performance when you're attempting to control the beast at its limits. Interior upgrades include new leather and alcantara surfaces throughout the cabin, including a leather-clad trunk.

VW looking to MAN up, ditch Mercedes van deal

Unlike the US, the commercial truck market throughout the rest of the world is chocked full of competitors from many different automakers. Since 2006, Volkswagen has had a fullsize van called the Crafter that was a result of a partnership with Daimler AG and based on the Mercedes-Benz Sprinter. This partnership is supposed to last through 2016, but Reuters is reporting that VW might be looking to end its relationship with Daimler and create its own van in cooperation with German truck and bus maker MAN.
The article says that VW AG has more than a 75-percent stake in MAN, which would essentially be keeping the new commercial vehicle in-house. Even if VW bolts, Daimler still has a deal worked out in the commercial truck industry between its subsidiary Mitsubishi Fuso and Renault-Nissan to supply the other with different trucks.

Mercedes-Benz engines with 48-volt systems coming in 2017

As part of a big green push announced yesterday, Mercedes-Benz is jumping into the world of 48-volt power. The company will launch a new family of efficient gasoline engines next year and will begin rolling out 48-volt systems with it, likely in its more expensive cars first. Mercedes will use the 48-volt systems to power mild-hybrid functions like energy recuperation (commonly called brake regeneration), engine stop-start, electric boost, and even moving a car from a stop on electric power alone. These features will be enabled through either an integrated starter-generator (Mercedes abbreviates it ISG) or a belt-driven generator (RSG). (RSG is from the German word for belt-driven generator, Riemenstartergeneratoren. That's your language lesson for the day.) Mercedes didn't offer many other details on the new family of engines. There are 48-volt systems already in production; Audi's three-compressor SQ7 engine uses an electric supercharger run by a 48-volt system, and there's a new SQ5 diesel on the horizon that will use a similar setup with the medium-voltage system. Electric superchargers require a lot of juice, which can be fed by either a supercapacitor or batteries in a 48-volt system. Why 48-volt Matters: Current hybrid and battery-electric vehicles make use of very high voltages in their batteries, motors, and the wiring that connects them, usually around 200 to 600 volts. The high voltage gives them enough power to move a big vehicle, but it also creates safety issues. The way to mitigate those safety issues is with added equipment, and that increases both cost and weight. You can see where this is going. By switching to a 48-volt system, the high-voltage issues go away and the electrical architecture benefits from four times the voltage of a normal vehicle system and uses the same current, providing four times the power. The electrical architecture will cost more than a 12-volt system but less than the complex and more dangerous systems in current electrified vehicles. The added cost makes sense now because automakers are running out of ways to wisely spend money for efficiency gains. Cars can retain a cheaper 12-volt battery for lower-power accessories and run the high-draw systems on the 48-volt circuit. The industry is moving toward 48-volt power, with the SAE working on a standard for the systems and Delphi claiming a 10-percent increase in fuel economy for cars that make the switch.