2004 Mazda Rx-8 Base Coupe 4-door 1.3l on 2040-cars

Auto blog

Mazda's Hofu plant builds its ten-millionth car

Ten million is a lot no matter which way you cut it, and no matter what you're talking about: Ten million dollars, ten million miles, ten million people... certainly ten million cars. And that's the milestone that Mazda's Hofu plant in Yamaguchi prefecture of Japan has just achieved.
The Hofu facility has been in operation since 1982, and was supplemented with a second plant on the same site ten years later. Hofu reached a million units built in 1986 and five million in 2002. But with production now at 482,100 units per year, it took less than twelve years to double that previous milestone.
The magic ten-millionth car was a new Mazda6 (known locally as the Atenza), which is built at Hofu Plant No. 2, while Hofu Plant No. 1 gears up for the new Mazda3 (aka Axela). Scroll down below for a related press release.

Mazda reports strong Skyactiv sales, plans to boost output 25%

Mazda is set to expand production of its Skyactiv engines after critical and commercial acclaim for the fuel-sipping powerplants. The Japanese manufacturer has a number of plans in the works to bump up production, with the first being a 25-percent increase in output from its Hiroshima, Japan engine facility.
Besides adding a new line, Mazda will modify the line that built MZR engines, a family of mills that includes the 2.3-liter, turbocharged four-cylinder found in the Mazdaspeed3 and the 2.0-liter found in the MX-5 Miata. The bump in production is just part of Mazda's goal of selling 1.7 million vehicles globally by 2016, with 80 percent of those vehicles expected to wear a Skyactiv badge.
Mazda also builds Skyactiv engines at a joint-venture facility with Ford, in Changan, China, while a Mexican facility will go online by March of 2014. Skyactiv engines currently power the Mazda3, Mazda6 and CX-5.

Mazda recalling 18k Mazda6 and RX-8 models over airbag inflators

Faulty Takata airbag inflators keep taking their toll on automakers. Mazda is the latest to be affected in the US by announcing a recall covering 18,050 Mazda6 and RX-8 models to replace the front, passenger-side airbags. Specifically, the campaign covers 18,000 Mazda6 units from the 2003 and 2004 model years built between May 29, 2002, and March 4, 2004, and 50 RX-8 vehicles from the 2004 model year made between June 25, 2003, and June 30, 2003.
As with the rest of the vehicles with these faulty inflators, it's possible for the part to rupture when deploying the airbag and potentially spray shrapnel at the occupant. Mazda's defect notice goes into a bit more detail than most about the problem saying: "some propellant wafers have been produced with an inadequate compaction force, or may have been exposed to uncontrolled moisture conditions (those wafers could have absorbed moisture beyond the allowable limits)."
This isn't Mazda's first difficulty with Takata-supplied airbags this year. The company was among the seven automakers that recalled vehicles in hot-weather states over the inflators. It also had to recently fix 42,000 Mazda6 vehicles in China over the issue.