1994 Mazda Rx-7 Touring on 2040-cars

Auto blog

Mazda CX-9 Luggage Test | How much fits behind the third row?

We recently tested the luggage-carrying capability of one of the most spacious three-row crossovers, the Hyundai Palisade, and now it's time for one of the smallest. The Mazda CX-9 may look terrific and drive even better, but that zest comes at the expense of cargo capacity, as we're about to see. The big culprit is that rakish liftgate, which not only robs the CX-9 of luggage space, but third-row headroom as well. It's pretty dungeon-like back there despite competitive legroom, and there aren't any air vents or USB ports, either. But this is about cargo capacity, so let's see how much luggage will fit inside. According to the specs, the CX-9 has 38.2 cubic-feet with the third-row lowered. That's far less than the Palisade's 45.8 and Honda Pilot's 46.8. It's actually even less than the five-passenger Honda Passport (50.5).  The test car came with a $100 cargo mat, which is velcroed to the seats and folds OK with it, but the carpet also takes up some extra space ... and the CX-9 needs as much as it can get.  To raise the seats, lean inside and pull up/back on those two handles. There is 14.4 cubic-feet of space behind the raised third row. On paper, that is indeed one of the smaller amounts in the segment, but in practice, it seems even smaller.  You can free up space by removing the rigid floor panel. If you need to carry multiple pieces of luggage, it's almost a necessity.  OK, so I have two midsize roller suitcases, both of which would need to be checked. Then there's two larger carry-on roll-aboards and one smaller one. As a bonus, there's my wife's quasi-fancy weekend bag. It was a struggle to fit three of them aboard, and Tetrised together two formations. The first uses all three carry-on bags with the cargo floor removed. And no, the fancy bag won't fit atop the blue one because it'll run into the liftgate window. A smaller tote would definitely fit, however.  This is how I could fit one of the bigger check-in bags. The liftgate just barely closed. Again, you could fit a small tote atop the blue bag, plus some other items in the lower outboard regions.  OK, so how could you fit everything aboard? Lowering half of the 50/50-split third row is a must, obviously. Both big check-in bags then stack atop each other, and then stack the other four atop each other with the cargo floor in place.

Next-gen Mazda MX-5 Miata mule spied 'Ring testing

Fans of simple, lightweight motoring, rejoice - we now have images of the next-generation Mazda MX-5 Miata undergoing testing at der Nürburgring Nordschleife. Now, to be fair, this isn't some lightly camouflaged example that will give us a great peak of what the next Miata, which will also become the next Alfa Romeo Spider, will look like. This is a mule, with the new bits hidden under a current Miata's body. That doesn't mean there aren't a few scraps of valuable information here, though.
According to our flock of camera-toting spies at the Nürburgring, the next Miata is likely to grow a bit, as new models are wont to do. In particular, it will be longer and wider, and the wheelbase is likely going to be stretched, based on the shape of the wheel wells and doors. Both of those factors will add more space in the cabin.
Those are the big indications provided by these photos, but while the MX-5 might be growing, it's a safe bet based on these images that it, and the (likely pricier) Alfa, will retain the classic, long-hood, short-deck styling that so typifies rear-drive roadsters.

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video: