1999 Mazda Protege Lx Sedan 4-door 1.6l on 2040-cars

Auto blog

Junkyard Gem: 1991 Mercury Capri

Ford has gotten a lot of use out of the Capri name in the United States. First, there was the Lincoln Capri in the 1950s, followed by the Ford Capri Mk1 (which was sold by Mercury dealers in the USA but never actually badged as a Mercury). Then came the 1979-1986 Mercury Capri, built on the very successful Fox Platform and essentially a clone of the Mustang. Finally, in 1991, the Australian Ford Capri came to the United States. Here is an example of this rare car that I spotted in a Northern California self-service yard not long ago. Mechanically speaking, the 1991-1994 Capri was a Mazda 323 under the skin, complete with a member of the same B-series engine family that went into such cars as the Miata and Ford Escort. So, for a few years in the early 1990s, car shoppers who wanted a sporty Mazda convertible could choose between a Miata and a Capri. The Capri had front-wheel-drive, but could be had with factory turbocharging. These cars were reliable and fun, but had a tough time competing with the Miata in the showroom battles. You'll see the occasional example now and then, but most of the 1991-1994 Capris have met the same fate that awaits this one. Related Video:

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

2017 Mazda Model Year Preview and Updates

Driving Matters, Mazda's marketing pitch, certainly resonates with enthusiasts, although may not be relevant with the increasing number of drivers engaged in texting while steering. Regardless of that disconnect, for drivers Mazda brings to market the long-awaited Miata coupe in Retractable Fastback (RF) form, pictured above. And for those wanting/needing a new crossover, Mazda redesigns its well-received CX-5. MAZDA3: Mazda's compact sedan and hatch receive a revised front end and tweaked rear. Inside, an upgraded interior with more storage space, improved sound proofing and materials round out the enhancements. On the road, all trim levels receive Mazda's G-Vectoring Control for enhanced handling and stability. MAZDA6: G-Vectoring Control is standard across all trims. Inside, improved sound insulation, new tech (including traffic sign recognition), and available Nappa leather takes an already upscale environment a few steps further into near-luxury. MAZDA MX-5 MIATA: The RF (Retractable Fastback) is the biggest news, as it serves as the answer to the long-awaited Miata coupe. Club models receive Blind Spot Monitoring and Cross-Traffic Alert – presumably helpful when the top is up. And the RF Launch Edition (1,000 examples) delivers a Nappa leather interior and hand-painted black top. The package is further embellished by Mazda's choice of Machine Gray metallic exterior color. MAZDA CX-3: Mazda's subcompact crossover receives minor updates. The Touring trim gets 18-inch alloy wheels, while the upmarket Grand Touring's available i-ACTIVSENSE is reduced in price. MAZDA CX-5: Mazda's compact crossover is all-new and on Mazda showrooms this spring as a 2017 model. Of particular interest to diesel fans is the introduction later in the year of Mazda's SKYACTIV-D 2.2 clean diesel, which arrives just in time for your Volkswagen buyback. MAZDA CX-9: Mazda's largest crossover is unchanged for 2017.