Mazda Speed, White, Sunroof, on 2040-cars

Auto blog

100k Mazda6 sedans recalled over tire-monitoring systems

A tire pressure monitoring system (TPMS) is, as you might have guessed, designed to monitor the air pressure in the tires, and alert the driver if pressure drops. But a problem found in the Mazda6 could keep the system from doing its job. According to the recall notice issued by the National Highway Traffic Safety Administration, the TPMS in the Mazda6 might not recognize a loss in tire pressure if all the tires slowly deflate at the same time. Under-inflated tires, it goes without saying, could increase the risk of a crash. As a result, Mazda is recalling 99,711 examples of the 2014-2015 Mazda6 to have the system's software updated. RECALL Subject : Tire Pressure Monitoring System/FMVSS 138 Report Receipt Date: OCT 27, 2014 NHTSA Campaign Number: 14V675000 Component(s): TIRES Potential Number of Units Affected: 99,711 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2014-2015 Mazda6 vehicles manufactured October 25, 2012, to October 10, 2014. If the pressures of four of the tires on an affected vehicle gradually drop at the same time, the tire pressure monitoring system (TPMS) may not warn the driver of the drop in pressure. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) No. 138, "Tire Pressure Monitoring System." CONSEQUENCE: A vehicle that is driven with under inflated tires may experience a sudden tire failure, increasing the risk of a crash. REMEDY: Mazda will notify owners, and dealers will update the TPMS software, free of charge. The recall is expected to begin on December 10, 2014. Owners may contact Mazda customer service at 1-800-222-5500. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Fiat 124 Abarth Spider spied, may get Alfa 4C power

We've long been excited to see, hear, and drive the car that results from the in-process Fiat-Mazda partnership. The Italian brand has had access to the excellent 2016 Mazda MX-5 Miata on which to base its own roadster, and the fruits of that labor will soon ripen. Spied here is not only the ensuing Fiat 124, but a hotter Abarth tuned version of the spider. At least, that's what we're hoping. Our spy shooters indicated that the car seen here not only sounded more aggressive than 'standard' 124 mules seen previously, but that it also accelerated away from their long lenses with a smartness. The 124 Spider is already rumored to make use of the 1.4-liter turbo I4 that makes 160 horsepower in the Fiat 500 Abarth, and this version may have a still-more-powerful engine. Another tell about the added output are the quad tailpipes in place of the lesser car's set of two. There's no hard evidence to support exactly which engine might be under the 124's hood, however. It's possible that the 1.7-liter turbo from Alfa Romeo 4C could be in play – with its 237-hp output – as the 124 was originally going to wear an Alfa badge. If that were to happen, however, the Fiat would almost certainly get a dual-clutch transmission instead of the purer manual box. In any event, more details about the car will no doubt crop up closer to the expected reveal this fall. Related Video:

Next Mazdaspeed3 could go naturally aspirated?

The new Mazda3 is a stunner, both aesthetically and from a driving perspective. As with all good things, though, there's always room for improvement. That's where the wizards from Mazdaspeed come in. Mazda's in-house tuner has been tweaking and turbocharging the five-door Mazda3 since 2007, with impressive results.
We've shown you renderings of what the third-generation Mazdaspeed3 could look like, and for the most part your response was quite positive. Now, AutoExpress has come out with details of just what might be under that long hood. According to our friends across the pond, the new Mazda3 MPS (that's what the Speed3 is called in Her Majesty's auto industry) will be arriving with a new, high-revving, naturally aspirated engine. Wait, what?
Yes, if the rumors are to be believed, the next Mazdaspeed3 will ditch its turbocharger. According to an anonymous engineer, the new MS3 will arrive in December (this is for the UK market, mind you) with a 200-horsepower, naturally aspirated engine. The 2.0-liter mill is based on the Skyactiv engine in the new 3, and should be capable of a sub-seven-second run to 62 miles per hour.