Mazda Mazda3 I Touring New 4 Dr Sedan Automatic Gasoline 2.0l 4 Cyl Soul Red Met on 2040-cars

Auto blog

Mazda shows lightweight MX-5 Spyder and Speedster at SEMA

Ever since Mazda dropped the first teaser on us last week, we've been looking forward to seeing what it had in store for us at SEMA this year. Now we've seen it what Mazda has dubbed the MX-5 Spyder and MX-5 Speedster, and they were worth the wait. The Spyder goes vintage with a silver paintjob and a brown top stretched overhead. It also has an aero kit, grille, and tonneau cover done up in carbon fiber, rides on 17-inch wheels, and features a natural leather interior. The blue Speedster, meanwhile, goes for the stripped-down, wind-in-your-hair experience. It has no roof or windshield, just a tiny deflector at the front of the dashboard. It's dropped an inch closer to the ground on an adjustable coilover suspension with 16-inch alloys, and features a center-exit exhaust. Carbon fiber helps trim 250 pounds from the curb weight, along with a stripped out interior trimmed in Alcantara. Both look pretty slick, and disappoint only in so far as they (like so many of their predecessor concepts) won't be heading for production. If they were, we'd be hard pressed to choose between the two. Which would you go for? Mazda Reveals Extreme Lightweight Design Concepts at 2015 SEMA MX-5 Concepts Display Two Different Takes on Staying True to Pure, Lightweight Sports Car Philosophy LAS VEGAS (November 3, 2015) – Mazda revealed two design concepts today at the SEMA Show in Las Vegas, based on its all-new 2016 MX-5 Miata—MX-5 Spyder and MX-5 Speedster—demonstrating two vastly different takes on lightweight, open-air performance. Lightweight. Fun-to-drive. Roadster. Those three tenets have served as the foundation for the Mazda MX-5 Miata since its 1989 introduction and continue to serve the new fourth-generation model. Focused, lightweight engineering is a guiding principle of every Mazda vehicle made with SKYACTIV Technology, allowing for greater efficiency, improved performance and agile handling dynamics. But what if that sense of lightweight performance were taken to the extreme? What if Mazda's North American designers harkened back to vintage roadsters to create thoroughly modern, bespoke concepts for what a lightweight performance car should be The results would be the MX-5 Spyder and MX-5 Speedster concepts. "Both MX-5 Spyder and MX-5 Speedster are uncompromising designs that highlight the core strengths of MX-5," said Ken Saward, design manager, Mazda North American Operations.

2014 Mazda6 Skyactiv-D Wagon

This was sort of a quirky surprise drive opportunity. I've been over here in Italy for a while now, and Mazda Italia contacted me seemingly out of the blue to drive test some version of the Mazda6 with a diesel engine. Supremo. The Mazda6 is a sexy everyday beast and I have been digging their SkyActiv-D engines for a while now. Very spirited units.
My contact phones me the day of, and says he can come by with the car, and then we'll head off to some sort of special spot for dynamics testing and technical conversation. Nice deal, say I.
My guy Ernesto pulls up outside of the house and - lo and behold - it's a dang Mazda6 station wagon with the very most recent 2.2-liter SkyActiv-D motor good for 148 horsepower and healthy 280 pound-feet of torque. The wee four-banger with 14.0:1 compression ratio hauls this 3,260-pound wagon around with the best of them. A decent 0-to-60-mph time of 8.7 seconds, too.

Mazda engineer wants new rotary to be turbocharged

Hope springs eternal for Mazda to revive the high-revving Wankel engine for a new sports car, and the company keeps feeding that thirst with hints that it could happen. To make the possibility even more tantalizing, Mazda drivetrain and powertrain assistant manager Tetsushi Marutani tells Motoring that he wants the updated mill to pack a turbocharger. "Personally, I think that a rotary with some turbo or compressor would be good," Marutani said to Motoring. "Because a rotary, in my opinion, they require more [torque at] low speed, low down torque. So if we have some small compressor or turbo it would help." Mazda hasn't sold a rotary-powered model since the RX-8 and hasn't had a turbocharged one since the third-generation RX-7. However, the recent RX-Vision concept (above) at least hinted at a possible Wankel revival, and Mazda officials confirmed that its engineers continued to develop the engine since the RX-8's demise. The RX-Vision used a next-gen rotary called the Skyactiv-R, but Mazda didn't officially confirm any details about it. Rumors suggested the engine had a two-rotor layout with a total displacement of 1.6 liters. A two-stage electric turbo and hybrid powertrain would allegedly boost the total output of around 450 horsepower. The electric assistance could also counter the Wankel's lack of torque at low revs and poor fuel economy. Those rumored specs sound fantastic, but we still take the rotary's return with a grain of salt. Mazda CEO Masamichi Kogai is adamant that it's not worth the company's limited resources to develop a niche sports coupe instead of better selling vehicles. Related Video: