4dr Sdn Auto I Touring Mazda Mazda3 I Touring New Sedan Gasoline 2.0l 4 Cyl Engi on 2040-cars

Auto blog

Mazda recalling 190,000 CX-7s due to rusty ball joints

UPDATE: This post has been updated with additional information from Mazda. The Basics: Mazda is recalling 190,102 Mazda CX-7 crossovers built between February 14, 2006, to May 9, 2012 – model years 2007 through 2012. The Problem: Water can sneak in between the suspension ball joint fittings. If snow and road salt are common in your neck of the woods, the joints can corrode and separate from the lower control arms. That's bad if you enjoy steering your CX-7. According to Mazda, owners of affected models may notice a rattle from the front suspension due to the loose ball joint in the lower control arm fitting. Mazda describes separation of the ball joint and control arm as a "worst case" scenario "after extended operation in such condition." Injuries/Deaths: It's unknown if the rusting issue has led to any crashes, injuries, or deaths. Autoblog has a call into Mazda for additional details and will update this post with any new information. There have been no reports of accidents, injuries, or fatalities related to this recall. The Fix: Owners should report to their local Mazda service center, where techs will replace the both front lower control arms. Any work done is free of charge. If you own one: Mazda will perform some automotive triage with this recall, focusing on CX-7s that have had the longest exposure to salt and are most likely to suffer control arm separation first. Owners of 2007s and 2008s come first, followed by 2009 through 2011 models. Mazda will also focus on vehicles registered in states where snow and road salt are most common – Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, D.C. If you live in a more temperate region or own a 2012 CX-7, Mazda will perform recall work as "parts are available." Owners can contact Mazda customer service at 1-800-222-5500 for additional info. Recall notices should hit the mail around October 10th. Related Video: Featured Gallery 2011 Mazda CX-7: Review View 21 Photos News Source: NHTSAImage Credit: Copyright 2016 AOL Recalls Mazda Crossover mazda cx-7

Mazda's new Mexican plant capacity rises to 230,000

After the turmoil of last year, 2013 is getting off to a much better start for Mazda. The company has issued a release indicating that the forthcoming plant in Salamanca, Mexico has had its production capacity raised even though it isn't scheduled to go online until March 2014. The original plans called for a 140,000-unit capacity, 90,000 of that allotted for the Mazda2 and Mazda3, the remaining 50,000 for a small car Mazda would build for Toyota that would be based on the Mazda2. The new plans call for raising that by 90,000 units to a total of 230,000 units within two years, by the end of March 2016, and it looks like it will all go toward Mazda production to satisfy growing demand for Skyactiv vehciles. The Mexican plant's opening will be the return of Mazda manufacturing to North America, after Mazda6 production was moved back to Japan last year.
More good news for the company is that it projects 10 billion yen ($114 million) in net income for the financial year that will end in March. That would be a welcome turnaround from the 100-billion-yen loss in the previous financial year, part of a series of three annual losses in a four-year span.
You'll find the press release with the factory update below.

Flyin' Miata is building a V8-powered MX-5 ND

It's cold in many parts of the country, but this V8-swapped 2016 Mazda MX-5 Miata that Flyin' Miata is developing has us dreaming about throwing on a parka and taking a very brisk drive. This beast is the product of the talented folks at Flyin' Miata, but we can't get too excited just yet. According to the company's brief Facebook post, this is just a dummy V8, placed under the Miata's hood to confirm fit. Judging by the photo, the engine fits like a glove. "There's still a long way to go before this is a real thing," Flyin' Miata writes, but the company admits everything looks "very promising" so far. The post doesn't mention any details about the estimated specs, but Autoblog reached out to Flyin' Miata for more information about this intriguing build. Keith Tanner, one of the mad scientists who shoehorns V8s into Miatas at the Colorado outfit, told us that Flyin' Miata is looking at both the LS3, which will provide between 430 and 525 hp, and the LT1 which is 460 hp out of the box. A supercharged LT4 is also being considered, but as Tanner put it, "that might be a little nuts" in a car as light as the ND. In any of these engine configurations, Tanner estimates the V8-swapped ND should comfortably be a sub-4 second to 60 mph car. The transmission will be a Tremec T56 Magnum six-speed manual. The suspension, brakes, fuel system, cooling system, and the chassis itself will all be beefed up to handle the power, as per normal FM practice. The one question mark is the rear end, as the ND's existing one simply won't be up to the task of putting that much horsepower to the ground. The 2016 Miata was one of the best cars we drove in 2015, but Flyin' Miata knows how to turn a standard MX-5 into an absolute hotrod with the company's LS3 V8 conversions for earlier models. Imagining the more modern chassis from the latest generation with a massive dollop of more power is an exciting thought. We can't wait to see how this project turns out. Related Video: