2004 Mazda 3 S Hatchback 4-door 2.3l on 2040-cars

Auto blog

Mazda CX-5 in auto-brake accident on Japanese test drive

As we slowly march towards a world where our cars will drive for us, there will be mishaps. Systems will act up, not behave has intended or we'll simply forget to turn them on. We all remember when Volvo tested the S60's City Safety system. Now Mazda has had an issue of its own.
During a test of a Mazda CX-5's Smart City Brake Support on a dealership lot in Japan, a prospective customer and a dealership employee were injured when they hit a urethane barrier used for testing the system. According to Bloomberg, which spoke with the Saitama Prefectural Police, the impact with the barrier left the customer with an injured neck while the dealership employee suffered a fractured arm. Considering the injuries, we imagine this wasn't a small barrier.
"For any safety function, it's impossible to be 100-percent free of accidents. These technical functions aren't always the easiest to understand," IHS Automotive auto parts analyst, Hiroshi Ataka told Bloomberg.

Mazda's Hofu plant builds its ten-millionth car

Ten million is a lot no matter which way you cut it, and no matter what you're talking about: Ten million dollars, ten million miles, ten million people... certainly ten million cars. And that's the milestone that Mazda's Hofu plant in Yamaguchi prefecture of Japan has just achieved.
The Hofu facility has been in operation since 1982, and was supplemented with a second plant on the same site ten years later. Hofu reached a million units built in 1986 and five million in 2002. But with production now at 482,100 units per year, it took less than twelve years to double that previous milestone.
The magic ten-millionth car was a new Mazda6 (known locally as the Atenza), which is built at Hofu Plant No. 2, while Hofu Plant No. 1 gears up for the new Mazda3 (aka Axela). Scroll down below for a related press release.

2016 Mazda MX-5 Miata a knight in white satin

We're not going to lie to you. The reason you're seeing the fourth-generation Mazda MX-5 Miata on these pages again is solely because this is the first time we're seeing the roadster displayed in a color other than the ruby shade it was first shown in. Okay, okay, so this is the first time the Miata is being displayed at a North American auto show other than SEMA, and we'd say that this is the first time Mazda is showing a US-spec model, but clearly this is a right-hand-drive car. Either way, there's still not much to it yet, especially since Mazda is still withholding power and performance figures.
As expected, the ND Miata, as it is already known among the cognoscenti, will receive a 2.0-liter Skyactiv four-cylinder and the buyer's choice of a six-speed manual or a six-speed automatic here in the US. The 1.5-liter model engine that had been linked to the car back in the rumormill stage will not make it to our showrooms.
Preliminary specifications still show the Miata measuring just 154.1 inches in length overall, with an increased track width to 68.1 inches and a low, low overall height of 49.0 inches. Despite the larger-displacement engine and its presumably heavier weight, Mazda is still claiming ideal 50:50 weight distribution and a weight loss of over 220 pounds versus today's NC generation. All of which sounds like the Miata has the right ingredients to make good on its promised Jinba Ittai ("rider and horse as one") driving experience.