2.3l Manual Transmission Cloth Keyless Entry Cruise Control Power Fog Lights on 2040-cars

Auto blog

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.

Weekly Recap: Toyota, Mazda team up to 'make cars better'

Toyota and Mazda are teaming for a noble purpose: to "make cars better." That's how the two Japanese automakers termed their partnership, which was announced this week. So what does this actually mean? The companies said they will set up a joint committee to look for areas of cooperation and named safety and the environment as issues they plan to tackle. From a product perspective, it's believed that Toyota is interested in Mazda's Skyactive engine portfolio. In turn, Mazda has its eye on Toyota's fuel-cell and plug-in hybrid technology. While more specifics were not confirmed, the companies said the "agreement will go beyond the traditional framework of cooperation," and it has the potential to be a long-range partnership. "The main purpose of this initiative is to enhance the appeal of our cars," Toyota president Akio Toyoda said at the announcement. Previously, Mazda has licensed Toyota's hybrid tech and assembled compact cars for Toyota in Mexico. Akio Toyoda said these projects "triggered" the automakers to explore further collaboration. Dave Sullivan, product analysis manager for AutoPacific, said the tie-up echoes Daimler's wide-ranging work with the Renault-Nissan alliance. "This could be a well-groomed match due to each having very unique skill sets," he said. OTHER NEWS & NOTES Volvo selects South Carolina for US factory Volvo confirmed this week that it will build its first US factory in South Carolina, with construction set to begin this fall. The company first revealed plans in March, though it didn't announce a site. The plant will have initial annual production of 100,000 units, though the vehicle or vehicles to be assembled were not specified. The factory, located near Charleston, will open in 2018 and ultimately employ 4,000 people. The facility will help Volvo continue its growth strategy, which includes strengthening its presence in the US market, where it wants to sell more than 100,000 cars per year. "Building a plant in the US is a reflection of Volvo Cars' commitment to the US and the key role the US plays in our growth objectives," Lex Kerssemakers, senior vice president, Americas, said in a statement. Ford GT spied on the road The 2017 Ford GT was spotted testing around the Blue Oval's headquarters in Dearborn, MI, this week. The raw body panels were exposed, and they lacked paint or camouflage. It's the first time the GT has been captured on the street after a spring of auto show reveals.

2016 Mazda MX-5 Miata design walkaround

By now, you've likely read what we think of the 2016 Mazda MX-5 Miata's new looks both inside and out, and you've probably poured over the available photos and started to make up your own mind about the roadster's radically more aggressive new appearance. More than likely, however, you haven't heard much from Mazda itself about its new design, and we're here to remedy that. Join Autoblog as we go over the new Miata from tip to tail with Derek Jenkins, Mazda North America's director of design. Jenkins, a veteran of both Audi and Volkswagen design studios, has been with the Japanese automaker for nearly four years, and he's kept a close eye in the ND Miata program along with his team in Irvine, CA. Check out our video to see Jenkins explain his team's exterior and cabin handiwork and to learn a little more about why the new model graduates from the Miata's historically cute and friendly aesthetic to something altogether more assertive.