08 Mazdaspeed3 Manual 6 Spd 2.3 Turbo Mazdaspeed6 Wrx Evo 350z G35 Sti Evolution on 2040-cars

Auto blog

First batch of 2016 Mazda MX-5 Miatas lands in US [w/video]

Have you been patiently awaiting the arrival of the all-new 2016 Mazda MX-5 Miata? Then we're glad to report that your patience has paid off. In fact, even if you haven't been so patient, we're still glad to report that the wait is finally over, as the first batch of the new Japanese roadsters has arrived on American soil. The initial batch of several hundred MX-5s arrived at the port of San Diego from the factory in Hiroshima on board the Phoenix Leader, a 636-foot vehicle carrier ship registered in Panama and operated by Japanese shipping giant NYK Lines. The vehicles are currently being processed at the SoCal port, with deliveries to commence "in the next several weeks," according to Mazda in the brief statement below. The fourth-generation Miata, designated generation ND, mad its global debut at the Paris Motor Show, and its US debut at the LA Auto Show. Production commenced in Japan this past March. The new roadster arrives in US showrooms with a 2.0-liter four-cylinder engine (the smaller 1.5 kept away from these shores), a six-speed manual (replacing the previous five-cogger), a folding soft roof (no retractable hard top this time), and a starting MSRP of $24,915 (plus an $820 destination charge). That, of course, is for the base Sport model, with higher-spec Club and Grand Touring trims also on offer. Along with the images above, you can watch footage of the vehicles driving off the ship in the video below. Might we recommend, however, muting the cheesy soundtrack and playing something more suitable over it instead. Neil Diamond's (Coming to) America ought to do the trick... today! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Mazda Welcomes the First Shipment of All-New 2016 MX-5s Mazda North American Operations today welcomed the first shipment of the all-new 2016 MX-5s. They will begin their port processing procedures and deliveries will follow in the next several weeks. Featured Gallery 2016 Mazda MX-5 Miata: US Arrival Mazda Convertible Performance mazda mx-5 san diego port

Mazda G-Vectoring Control makes driving better without you knowing

Mazda has just spent eight years developing a new technology that will make its new cars a lot more fun to drive, even if you have absolutely no idea that it's working. And subtlety's the point, Mazda engineers told us at a press event at Mazda Raceway Laguna Seca. In fact, the effects of what they've dubbed G-Vectoring Control are so fine that the marketing and PR teams are at a loss for how to do their jobs with it. "The engineers have done their work," said Mazda Director of Communications Jeremy Barnes, "But how do we get the message across?" The basic premise is this: G-Vectoring activates only when the car's on-board computer reads simultaneous steering and throttle input. The data — including throttle position, steering angle, and, crucially, how quickly you're adjusting the steering angle — are then funneled through an algorithm to reduce engine torque, which transfers vehicle weight, adding more grip to the wheels that need it. The system will appear first on 2017 Mazda6 sedans arriving in showrooms later this year, followed by the 2017 Mazda3. Actually, "subtle" does not even begin to describe the effect. G-Vectoring Control can detect as much as one tenth of one degree of steering angle, and changes the cornering forces only 0.1 to 0.5 g as a result. "That's less than the human body can feel," explained Vehicle Development Engineer Dave Coleman. In practice, G-Vectoring reduces the steering angle at turn-in, as well as the rate at which one turns the wheel. To demonstrate, Director of R&D Kelvin Hiraishi rode shotgun with us in a specially equipped Mazda6 that allowed him to turn G-Vectoring on or off at the push of a button (production cars will always have it on). Hiraishi had us drive a number of courses, including Mazda Raceway Laguna Seca itself, while an engineer measured our steering inputs with a laptop Matrix'd into the car's electronic brain. I drove the same course several times with the same car in the same conditions, with cruise control locked and the system turned on or off. Lo and behold, with G-Vectoring activated, the engineer's output graph showed that my steering inputs were indeed reduced ever so slightly. There were two times that G-Vectoring was markedly noticeable. The first on a turn with a minor banking toward the outside, and the second was during cornering over an artificially wet section of the course — in other words, when the car was at the limits of adhesion.

Mazda on sales upswing in Europe but won't build there

Auto sales in Europe have been a tricky proposition for some years, but Mazda has seen some success on the backs of the CX-5 and new Mazda6. According to a report form Automotive News Europe, though, that doesn't mean we should be looking for the Japanese manufacturer to set up production operations there.
Mazda's European CEO, Jeff Guyton, explained to AN that "Our intention is to have manufacturing scale. That gives you scale economy and quality through repeatability." In other words, a big honking plant in one part of the world is preferable to a half dozen small factories building the same vehicles.
European sales for Mazda are up 5.4 percent in the first half of 2013, with 74,000 units sold. That kicked the Zoom-Zoom brand's market share up from one to 1.2 percent. Small gains, but gains nonetheless. According to Guyton, Mazda would need to sell 200,000 units of just one model in Europe for local production to make sense. Mazda's best European year saw 320,000 units sold across the entire range.